WenmarOpen by Wenmar Pro

Service bulletin 5NP-D8E5P-03

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10129910
Published by NHTSA2018-03-12
Manufacturer's number5NP-D8E5P-03
Manufacturer's date2018-02-26
NHTSA componentELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM

NHTSA's summary

Hyundai Motor America is conducting a Service Campaign to replace the evaporator temperature sensor and update the ECM software on certain 2016-17MY Tucson vehicles. Service Campaign T2U provides a service procedure to replace the evaporator temperature sensor and update the ECM software.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Software

Vehicles listed
HYUNDAI TUCSON2016, 2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V6280002016-08-30. ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE (TCM/PCM/TECM)

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
21-01-023H-42022-02-08. Service bulletin. Hyundai is conducting a campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
DBP9722022-01-08. Service bulletin. When asked to provide the Modem Information, the Universal Subscriber Identity Module (USIM) may not be available. This TSB# 21-01-080H describes the 3-part software to correct this condition and activate Blue Link Services.
20-BE-008H2020-07-08. Service bulletin. This bulletin provides information for new software to update the Navigation and Display Audio system to include the Apple CarPlay and Android Auto feature. This bulletin describes how to transfer the update software to a storage drive (USB or SD Card) and perform the software installation into the audio system.
20-01-004H - The2020-03-07. Service bulletin. Applicable vehicles with 2.0L Turbo and 2.4L GDI engines may experience the Check Engine warning lamp illuminated with DTC P1326. Follow the procedure to inspect the vehicle and replace the engine or update the engine ECU software based on the inspection results.
20-01-006H2020-03-07. Service bulletin. Hyundai is conducting a product improvement campaign to enhance the knock sensor software to detect abnormal engine bearing noise before potentially severe engine damage occurs. If abnormal engine bearing noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously, a chime will sound on certain vehicles, and the vehicle will be placed in Engine Protection Mode allowing the customer to drive to the nearest Hyundai dealer for diagnosis and repair. In addition, DTC P132600 will be recorded in the ECM. The vehicle can continue to be operated for a limited time in Engine Protection Mode, but it will accelerate slower and have a reduced maximum speed. Engine RPMs will be limited to approximately 1800-2000 RPM.
Campaign 953 Dea2020-03-07. Service bulletin. Hyundai has developed a new engine monitoring technology called a Knock Sensor Detection System (KSDS). The technology uses software innovations and leverages existing engine sensors to continuously monitor for symptoms that may precede an engine failure. Watch this video to learn more. The KSDS software continuously monitors engine vibrations for unusual patterns that develop as an engine connecting rod bearing wears abnormally that could later cause engine seizure. If vibrations caused by bearing wear start to occur, the malfunction indicator lamp will blink continuously, an audible chime will sound and the vehicle will be placed in a temporary engine protection mode with reduced power and acceleration. At that time, Diagnostic Trouble Code (DTC) P1326 will be recorded in the ECM. In addition, Hyundai will extend the warranty to 10 years and 120,000 miles (up from 100,000 miles) for original and subsequent owners of the covered vehicles for engine repairs needed because of excessive connecting rod bearing damage.
5NP-S6S9Z-122018-12-17. Service bulletin. This bulletin provides information related to a BMS (Battery Management System) ECU software update that must be performed after replacing a high voltage Lithium Battery in a Sonata HEV (YF HEV) or Tucson Fuel Cell Electric Vehicle (LM FCEV).
5NP-Q5T3B-052018-05-21. Service bulletin. This bulletin provides information related to the FCU (Fuel Cell Control Unit) software update for TUCSON FCEV (LM FCEV) vehicles. This update includes improvement for fuel cell stack durability and diagnosis condition.
5NP-T6W2Z-032018-03-12. Service bulletin. This bulletin provides information to replace the A/C Evaporator Temperature Sensor and to update the HVAC ECU on certain 2016-2017 model year Tucson (TL) vehicles.
5NP-X7Y4J-122017-10-15. Service bulletin. This bulletin provides the procedure to update both the ECM (Engine Control Module) and the TCM (Transmission Control Module) on some 2016 and 2017 Hyundai Tucsons equipped with a 7-speed EcoShift® Dual Clutch Transmission (DCT). The update will address: ? A slight hesitation at low speeds that can be experienced in certain driving conditions. This update improves the low speed engine and transmission response. ? Malfunction indicator light illuminated with DTC P0128 - Coolant Thermostat - Coolant Temp Below Thermostat Regulating Temperature.