# Service bulletin A201788 2043357\-

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10128200
- Published by NHTSA: 2018\-02\-05
- Manufacturer's number: A201788 2043357\-
- Manufacturer's date: 2017\-03\-24
- NHTSA component: COMMUNICATION; FUEL SYSTEM, OTHER; AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE

## NHTSA's summary

This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10128200-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10128200-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Air bags, Fuel system, Air bag control module

## Trouble codes named

P0461

## Vehicles listed

- 2013 to 2016 AUDI A4 ALLROAD
- 2013 to 2016 AUDI A5
- 2013 to 2016 AUDI A5 CABRIOLET
- 2014 to 2015 AUDI A6
- 2014 to 2015 AUDI A7
- 2013 to 2017 AUDI A8
- 2013 to 2016 AUDI Q5
- 2013 to 2015 AUDI RS 5
- 2016 AUDI RS 5
- 2013 to 2015 AUDI RS 5 CABRIOLET
- 2016 AUDI RS5 CABRIOLET
- 2014 to 2015 AUDI S4
- 2014 to 2015 AUDI S5
- 2014 to 2015 AUDI S5 CABRIOLET
- 2013 to 2017 AUDI S8
- 2014 to 2015 AUDI SQ5

## Other bulletins for the same vehicles and component

- [SM532014](/bulletins/10242630.md), 2023-09-25, Service bulletin: UNKNOWN OR OTHER; AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE. Module
- [A691428 2023323\-](/bulletins/10122295.md), 2017-11-08, Service bulletin: AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE\-INACTIVE; AIR BAGS. Supersedes Technical Service Bulletin Group 69 number 13\-26 dated October 21, 2013. After the airbag control module \(J234\) has been replaced, the control unit cannot be coded via SVM spec/actual. An SVM code is required to code and parameterize the new service replacement airbag control module. Each model's SVM code is provided in a parts bulletin \(GP bulletin\), which should have been referenced through ETKA when the module was replaced. The control module cannot be coded until the SVM code has been executed. If the SVM code was not acquired through the GP bulletin in ETKA, follow the instructions in the Service section of this bulletin to update the control module.

JSON: [/v1/bulletins/10128200](/v1/bulletins/10128200)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20A201788%202043357-&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10128200&vehicle=Service%20bulletin%20A201788%202043357-)