WenmarOpen by Wenmar Pro

Service bulletin PIT4534F

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10127223
Published by NHTSA2018-01-22
Manufacturer's numberPIT4534F
Manufacturer's date2015-09-23
NHTSA componentELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

NHTSA's summary

This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the (IPC/DSPLY) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Instrument cluster

Vehicles listed
BUICK ENCLAVE2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
CHEVROLET TRAVERSE2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
GMC ACADIA2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
SATURN OUTLOOK2007, 2008, 2009, 2010

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
14V2230002014-04-30. ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; FUEL SYSTEM, GASOLINE

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
PIT4720C2023-12-26. Service bulletin. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
PIT4534D2023-12-26. Service bulletin. Diagnostic Tip - Driver Information Center (DIC) Switch Buttons Are Inoperative.
14007A2023-12-11. Service bulletin. PSR-Inaccurate Fuel Level Readings
140072023-12-11. Service bulletin. PSR -Inaccurate Fuel Level Radings
130089004H2023-12-11. Service bulletin. Car and Truck Fix it Right the First Time Issues
PIT4720C2023-11-20. Service bulletin. Odometer Servicing When The Odometer Cannot Be Set To The Actual Mileage.
07-08-49-020R2023-10-18. Service bulletin. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
07-08-49-020J2021-04-20. Service bulletin. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system (SPS). 2. Odometer setup at the electronic service center (ESC) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. *The odometer programming is integrated as part of the BCM programming procedure. It is not a stand-alone event.
070849020M2021-04-16. Service bulletin. IPC Odometer Programming Method Quick Reference Guide
PIT4534G2020-12-14. Service bulletin. This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the (IPC/DSPLY) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.