# Service bulletin GCUS\-3\-559

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10126055
- Published by NHTSA: 2017\-12\-22
- Manufacturer's number: GCUS\-3\-559
- Manufacturer's date: 2016\-05\-20
- NHTSA component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

41060 \- Service Update. There may be a gap in the sealer bead for the seam that is located at the LH lower rear quarter panel, which could allow water intrusion into the vehicle. Water intrusion is most likely to occur during high pressure underbody washing and may result in the vehicle acquiring a musty smell over time. Apply urethane sealant and butyl patch over void.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10126055-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10126055-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Instrument cluster

## Vehicles listed

- 2016 BUICK ENCLAVE
- 2016 CHEVROLET TRAVERSE

## Other bulletins for the same vehicles and component

- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.
- [070849020M](/bulletins/10190320.md), 2021-04-16, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
- [PIT4534G](/bulletins/10184104.md), 2020-12-14, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the \(IPC/DSPLY\) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.
- [060089029T](/bulletins/10176647.md), 2020-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This informational bulletin includes information on Interior Cleaning \- Instrument Panel \(IP\), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer \- Product Availability.
- [060089029S](/bulletins/10176646.md), 2020-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This informational bulletin includes information on Interior Cleaning \- Instrument Panel \(IP\), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer \- Product Availability.
- [PIT4534F](/bulletins/10127223.md), 2018-01-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the \(IPC/DSPLY\) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.
- [PIC3100F](/bulletins/10125106.md), 2017-12-14, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about vehicle\&\#39;s odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand\-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor\&\#39;s wheel or a dynamometer.
- [08\-08\-44\-015F](/bulletins/10116878.md), 2017-08-31, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT:ELECTRICAL:RADIO/TAPE DECK/CD ETC.. This informational bulletin provides Information on Inappropriate Warranty Claims Submitted for Damaged Radios and Instrument Panel Clusters \(IPCs\)
- [16\-NA\-069](/bulletins/10112773.md), 2017-08-15, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This informational bulletin provides information on If the radar does not see any vehicles, structures, or objects for 15\-25 minutes of driving, the system may think its blocked and display the ?Side Object Detection System Disabled? message.

JSON: [/v1/bulletins/10126055](/v1/bulletins/10126055)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20GCUS-3-559&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10126055&vehicle=Service%20bulletin%20GCUS-3-559)