Service bulletin V381302 2024846
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10125722 |
| Published by NHTSA | 2017-12-14 |
| Manufacturer's number | V381302 2024846 |
| Manufacturer's date | 2013-07-16 |
| NHTSA component | POWER TRAIN |
NHTSA's summary
Technical Bulletin (Transfer Gear Bearing Noise): Some vehicles may have been built with transmission transfer gear bearings that have an incorrect bearing preload, which can result in transfer gear bearing noise. Customers may indicate that they hear a high pitch noise or growl coming from the left side of the vehicle. If the symptom is present, perform the following Repair Procedure.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Transmission and driveline
| VOLKSWAGEN ROUTAN | 2010 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| V3718022033975_13 | 2024-10-09. Service bulletin. Fluid requirements |
|---|---|
| Edition85 | 2023-10-02. Service bulletin. VW Elsa Newsletter |
| Edition115 | 2023-10-02. Service bulletin. VW Elsa Newsletter |
| Edition45 | 2023-09-18. Service bulletin. VW Elsa Newsletter |
| Edition67 | 2023-09-18. Service bulletin. VW Elsa Newsletter |
| Edition85 | 2023-09-18. Service bulletin. VW Elsa Newsletter |
| SVM3339 | 2023-07-17. Service bulletin. For an upcoming campaign that will include all MY09-14 TDI (CBEA/CJAA) vehicles, we need to test the SVM3339 code in 200 vehicles of various model-years and engine/transmission combinations. |
| TT131301a | 2023-07-10. Service bulletin. When servicing the timing chain sprocket or removing the vibration damper, be aware that one bolt holds both the vibration damper (harmonic balancer) and the crankshaft timing chain sprocket to the crankshaft. Once the damper is removed, the crankshaft should not be rotated unless special tool spacer T10368 has been installed. The crankshaft timing chain sprocket and spur gear drive on the crankshaft have a coupling that must be seated correctly during assembly. Failure to install special tool spacer T10368 before rotating engine will cause the engine to skip time and bend valves. |
| TT131301 | 2023-07-10. Service bulletin. CBFA 2.0T TSI Engine |
| V371802203397511 | 2023-07-10. Service bulletin. Automatic Transmission Fluid Requirements |