# Service bulletin 5NP\-F8W2R\-12

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10125167
- Published by NHTSA: 2017\-12\-14
- Manufacturer's number: 5NP\-F8W2R\-12
- Manufacturer's date: 2017\-11\-02
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION \(PRNDL\)

## NHTSA's summary

Hyundai Motor America is conducting a Service Campaign to replace the gear indicator lens cover on certain 2017\-18 model years Santa Fe and Santa Fe Sport vehicles. Service Campaign T2L provides a service procedure to replace the gear indicator lens cover.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10125167-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10125167-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline, Automatic transmission

## Vehicles listed

- 2017 to 2018 HYUNDAI SANTA FE
- 2017 to 2018 HYUNDAI SANTA FE SPORT

## Other bulletins for the same vehicles and component

- [19\-AT\-010H](/bulletins/10161750.md), 2019-07-01, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer pressure data to the ECU/TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
- [5NP\-P5L7D\-05](/bulletins/10138240.md), 2018-05-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. If you are servicing a vehicle with a harsh and/or delayed shift, use the GDS as shown in the Service Procedure to measure shift engagement time.
- [5NP\-B7C4X\-03](/bulletins/10129909.md), 2018-03-12, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT. If you are servicing an applicable vehicle with a shift lever that is difficult to move, follow the Service Procedure in this bulletin.
- [5NP\-D4K7P\-12](/bulletins/10125164.md), 2017-12-14, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION \(PRNDL\). Hyundai Motor America is conducting a Service Campaign to replace the gear indicator lens cover on certain 2017\-18 model years Santa Fe and Santa Fe Sport vehicles. Service Campaign T2L provides a service procedure to replace the gear indicator lens cover.
- [5NP\-Z6F3A\-11](/bulletins/10123305.md), 2017-11-14, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER. Before installing an automatic transmission, check the depth of the torque converter in the case to confirm the torque converter is fully installed in the transmission. If this is not done, the oil pump may be damaged.
- [5NP\-H7S5M\-07](/bulletins/10115694.md), 2017-08-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. Some vehicles with Neutral Control may experience a rough idle in Drive after decelerating to a stop when Neutral Control is enabled. This bulletin provides a diagnosis and repair procedure for this condition. Neutral Control is a fuel efficiency strategy that shifts the transmission into neutral at a stop. The transmission shifts into first gear when the brake pedal is released. Neutral Control is disabled when the shift lever is moved to the Manual Mode position or with the A/C on in some models.
- [5NP\-Z3W4Y\-04](/bulletins/10110938.md), 2017-08-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER; EQUIPMENT. On some 2017 Santa Fe Sport vehicles, the rear seat center armrest may exhibit a rattle noise due to improper torque of the mounting bracket bolts. This bulletin describes the procedure to verify the rear seat center armrest is torqued properly.
- [5NP\-G5N9M\-01](/bulletins/10089509.md), 2017-01-25, Service bulletin: EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM. IF YOU ARE SERVICING AN APPLICABLE VEHICLE WITH A COMPLAINT OF “CHECK ENGINE LIGHT ON” AND ONE OR MORE OF THE DTC LISTED BELOW, FOLLOW THE REPAIR PROCEDURE AND REPLACE THE RELATED SOLENOID AND OIL PRESSURE HARNESS.
- [5NP\-H8T3R\-10](/bulletins/10082458.md), 2016-10-14, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. THIS BULLETIN PROVIDES A PROCEDURE TO TRANSFER PRESSURE DATA TO THE PCM USING GDS MOBILE. THIS PROCEDURE IS NECESSARY TO REDUCE THE TCM LEARNING TIME AND IMPROVE THE SHIFT QUALITY.
- [5NP\-Y4G6Q\-09](/bulletins/10081502.md), 2016-10-05, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ELECTRICAL SYSTEM:SOFTWARE. THIS BULLETIN PROVIDES INFORMATION RELATED TO THE TCU SOFTWARE UPDATE FOR THE SUBJECT VEHICLES THAT MAY EXPERIENCE A TRANSMISSION HESITATION OR SHIFT SHOCK WHEN ACCELERATING AT SLOW SPEEDS.

JSON: [/v1/bulletins/10125167](/v1/bulletins/10125167)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%205NP-F8W2R-12&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10125167&vehicle=Service%20bulletin%205NP-F8W2R-12)