# Service bulletin PIC6042A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10125104
- Published by NHTSA: 2017\-12\-14
- Manufacturer's number: PIC6042A
- Manufacturer's date: 2017\-11\-07
- NHTSA component: POWER TRAIN:MANUAL TRANSMISSION; STEERING

## NHTSA's summary

This Preliminary Information communication provides information to the technician about vehicles that if replacement of either shift paddle is necessary, the steering wheel does not need to be replaced nor does it need to be removed to replace either shift paddle.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10125104-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10125104-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Steering, Transmission and driveline, Manual transmission

## Vehicles listed

- 2013 to 2018 CADILLAC ATS
- 2009 to 2018 CADILLAC CTS
- 2013 to 2018 CADILLAC XTS

## Other bulletins for the same vehicles and component

- [18357](/bulletins/10212577.md), 2022-05-31, Service bulletin: AIR BAGS; POWER TRAIN:MANUAL TRANSMISSION:COLUMN SHIFT ASSEMBLY; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY; POWER TRAIN. Special Coverage. On some vehicles, the vehicle may inadvertently shift into manual mode and, depending on the vehicle?s speed, the transmission will automatically downshift to first or second gear, resulting in a safe, but unwanted vehicle deceleration. If this occurs, the driver will not be able to shift out of manual mode until the vehicle. is turned off and back on again. The vehicle will also set diagnostic trouble codes P0816 and P1876. Dealers are to remove and replace the shifter assembly. The repairs will be made at no charge to the customer
- [990420002L](/bulletins/10200154.md), 2021-08-09, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
- [PI1489A](/bulletins/10190567.md), 2021-04-26, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; ENGINE AND ENGINE COOLING:ENGINE:ENGINE CONTROL MODULE \(ECU/ECM\). Malfunction Indicator Lamp \(MIL\) Illuminated, Intermittently Unable to Shift into Reverse, DTC P0502 Set Condition/Concern Some customers may comment on a malfunction indicator lamp \(MIL\) illuminated. They may also comment that they intermittently are unable to shift into Reverse. When checking the vehicle for DTCs, the engine control module \(ECM\) may report P0502 as current or in history. This may be caused by water intrusion into the vehicle’s manual transmission output speed sensor or could be induced by the customer slipping the clutch for an extended period of time, as in holding the vehicle on a hill.
- [PI1448B](/bulletins/10190565.md), 2021-04-26, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS; POWER TRAIN:MANUAL TRANSMISSION:COLUMN SHIFT ASSEMBLY; POWER TRAIN:MANUAL TRANSMISSION:FLOOR SHIFT ASSEMBLY. Service Transmission Light Flashing and/or Malfunction Indicator Lamp \(MIL\) On and DTC P0705 Set Some customers may comment on a malfunction indicator lamp \(MIL\) on or that the Service Transmission light is flashing. Customers may also comment that the shifter does not seem to shift correctly into each range. The technician may find DTC P0705 set or in history in the TCM
- [030729004L](/bulletins/10160133.md), 2019-05-20, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; EQUIPMENT. This informational bulletin provides normal operating characteristics and diagnostic information on Manual transmissions.
- [PIP5576](/bulletins/10145501.md), 2018-10-15, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN. This Preliminary information communicatesSES lamp, setting DTC P0333 when shifting the Transmissionfrom park.DTC P0333 cansetdue to voltage from the Transmission park/neutral signal 1circuit bleeding into the knock sensor system circuits.If SI does not isolate the concern inspect the K20 ECM connector X2 looking for debris, connectorand or terminal concerns.
- [03\-07\-29\-004J](/bulletins/10138130.md), 2018-05-21, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION. This informational bulletin provides technicians with information to assist in identifying operating characteristics of manual transmissions that repair attempts will not change.
- [PIP5375E](/bulletins/10137741.md), 2018-05-21, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION. This Preliminary Information communication advises the technician that the rear wheel drive manual transmission restriction has ended.
- [PIE0419A](/bulletins/10134607.md), 2018-04-23, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION. This engineering informational bulletin ends the need for information from the field on vehicles that have the condition of Harsh, Delayed, and/or Improper Shifts.
- [PIP5309](/bulletins/10114627.md), 2017-08-15, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION. This Preliminary Information communication advises the technician that the 8L45 8 Speed Automatic is on parts restriction through the General Motors Product Quality Center. Dealer will need to contact General Motors Product Quality Center for further assistance.

JSON: [/v1/bulletins/10125104](/v1/bulletins/10125104)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIC6042A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10125104&vehicle=Service%20bulletin%20PIC6042A)