Service bulletin TT 96-10-06
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10124307 |
| Published by NHTSA | 2017-12-05 |
| Manufacturer's number | TT 96-10-06 |
| Manufacturer's date | 2014-03-21 |
| NHTSA component | ELECTRICAL SYSTEM |
NHTSA's summary
Tech Tips (Immobilizer 2 ? Key Adaptation and Part Number): If new keys cannot be adapted, they may possibly be the incorrect part number. Cabrio is equipped with two generations (Gen2 and Gen3) of Immobilizer 2. Use the Immobilizer Control Module Part Number to distinguish between Gen2 and Gen3.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system
| VOLKSWAGEN CABRIO | 1999, 2000, 2001, 2002 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TT961006 | 2024-04-08. Service bulletin. key Adaptation and Part Number |
|---|---|
| Edition86 | 2023-10-02. Service bulletin. VW Elsa Newsletter |
| Edition115 | 2023-10-02. Service bulletin. VW Elsa Newsletter |
| Edition26 | 2023-09-18. Service bulletin. VW Elsa Newsletter |
| Edition86 | 2023-09-18. Service bulletin. VW Elsa Newsletter |
| TB011407 | 2023-08-28. Service bulletin. Software Version Management |
| Guide | 2023-08-14. Service bulletin. P0102, P1128, P1296 - WA front oxygen sensor faults |
| TT641402 | 2023-07-31. Service bulletin. To detect which line(s) is inoperative, utilize a volt meter to check for 0 V, which will be present after the open in the grid line. The check must be performed with the engine running and heated rear window switched on. Switch OFF the ignition and visually locate the damage. Proceed with checking any other lines as necessary. Once the damaged line is identified, repair utilizing the Repair kit by Permatex® ITEM 09117. |
| TT571302 | 2023-07-17. Service bulletin. If key blade is found to stick or bind when opening or closing, check position of roll pin that secures key blade to mechanism. If roll pin is sticking out on either side (as shown below), do not replace key. Instead, use appropriate sized punch and hammer to drive in the roll pin so that it is flush with edge of mechanism. |
| TT001403 | 2023-07-10. Service bulletin. When performing SVM updates, the scan tool should be hardwired to the vehicle and the Bluetooth physically turned off. A hard wired internet connection is also recommended. |