Service bulletin A641433 2029714-
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10122472 |
| Published by NHTSA | 2017-11-08 |
| Manufacturer's number | A641433 2029714- |
| Manufacturer's date | 2014-05-02 |
| NHTSA component | ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
Supersedes Technical Service Bulletin Group 64 number 12-22 dated July 5, 2012. After one or both of the front door control units (J386/J387) is replaced, one or both of the rear door control units (J3888/J389) cannot be coded or parameterized via an SVM specified vs. actual comparison (spec/actual). The parameter data in the software coding container has changed for the front and rear door control units. As a result, an SVM code is required to update the parameter data for any replacement control unit. Simply running an SVM spec/actual will not code nor update the parameter data in the new replacement control unit. A hardware change suggestion will be provided when an SVM spec/actual is executed. An additional hardware replacement is not required.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Software
| AUDI A3 CABRIOLET | 2015 to 2016 |
|---|---|
| AUDI A5 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| AUDI A6 | 2011, 2012, 2013, 2014, 2015, 2016 |
| AUDI A7 | 2011 |
| AUDI A7 | 2012, 2013, 2014, 2015, 2016 |
| AUDI RS 5 | 2013, 2014, 2015 |
| AUDI RS 5 | 2016 |
| AUDI RS5 | 2010 to 2012 |
| AUDI S5 | 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 |
| AUDI S6 | 2011 |
| AUDI S6 | 2012 |
| AUDI S6 | 2013, 2014, 2015, 2016 |
| AUDI S7 | 2012 |
| AUDI S7 | 2013, 2014, 2015, 2016 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 45140920387701 | 2024-03-04. Service bulletin. ESP warning light on |
|---|---|
| 0112622029340 | 2024-02-20. Service bulletin. incorrect software setting. In some scenarios such as extended idling or heavy stop and go traffic, this could cause a slight misinterpretation of the data and possibly an activation of the Malfunction Indicator Light. |
| 68E3UPDATEa | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| 68E3UPDATE | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| Update68E3 | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| A0023822047812_7 | 2024-01-04. Service bulletin. This bulletin provides information on how to set up and use the SD Creator for obtaining vehicle software updates via the Mirror Server. |
| A0123972072121_1 | 2023-12-06. Service bulletin. This bulletin provides information for when the MIL/EPC light is illuminated, DTC P042000 or P043000, Catalyst system, bank 1 or 2 efficiency below thresh hold. |
| Edition89 | 2023-02-06. Service bulletin. ElsaPro Software update and technical bulletins |
| 01145620329002 | 2023-01-03. Service bulletin. The fault listed can occur under certain driving conditions. It is caused by an incorrect software setting. Some driving scenarios (such as extended idling or heavy stop-and-go traffic) can cause a slight misinterpretation of the data, which causes the MIL to illuminate. |
| 01140020262994 | 2023-01-03. Service bulletin. An incorrect software setting causes the DTC to be stored. |