Service bulletin Update Bulletin
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10122046 |
| Published by NHTSA | 2017-11-03 |
| Manufacturer's number | Update Bulletin |
| Manufacturer's date | 2013-10-22 |
| NHTSA component | ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
Under certain conditions, permanent mode $0A DTC codes concerning the fuel pump power stage module may remain visible after the vehicle?s OBD system has run the proper monitors successfully to allow the DTC to be erased by the system, after a proper repair. This software malfunction may cause vehicle to not pass IM inspection programs. This software update eliminates specific permanent DTC codes stored in mode $0A of the ECM. All other DTC storage functions remain unaffected. This Update is in effect until removed. Procedure is valid only for vehicles that show the 24AD code in the ElsaWeb Campaign/Action Information screen on the day of repair. Vehicle must be within the Federal Emissions Warranty. Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable vehicles in dealer inventory prior to sale.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Electrical system, Software
| AUDI A4 ALLROAD | 2013, 2014 |
|---|---|
| AUDI A4 AVANT | 2012 |
| AUDI A5 | 2012, 2013, 2014 |
| AUDI A5 CABRIOLET | 2012 to 2014 |
| AUDI A6 | 2012, 2013, 2014 |
| AUDI ALLROAD | 2012 to 2014 |
| AUDI Q5 | 2012, 2013, 2014 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 45140920387701 | 2024-03-04. Service bulletin. ESP warning light on |
|---|---|
| 0112622029340 | 2024-02-20. Service bulletin. incorrect software setting. In some scenarios such as extended idling or heavy stop and go traffic, this could cause a slight misinterpretation of the data and possibly an activation of the Malfunction Indicator Light. |
| 68E3UPDATEa | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| 68E3UPDATE | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| Update68E3 | 2024-01-22. Service bulletin. Comfort System Central Control Module Software Update (NVLW) |
| A0023822047812_7 | 2024-01-04. Service bulletin. This bulletin provides information on how to set up and use the SD Creator for obtaining vehicle software updates via the Mirror Server. |
| A0123972072121_1 | 2023-12-06. Service bulletin. This bulletin provides information for when the MIL/EPC light is illuminated, DTC P042000 or P043000, Catalyst system, bank 1 or 2 efficiency below thresh hold. |
| Edition89 | 2023-02-06. Service bulletin. ElsaPro Software update and technical bulletins |
| 01145620329002 | 2023-01-03. Service bulletin. The fault listed can occur under certain driving conditions. It is caused by an incorrect software setting. Some driving scenarios (such as extended idling or heavy stop-and-go traffic) can cause a slight misinterpretation of the data, which causes the MIL to illuminate. |
| 01145420255474 | 2023-01-03. Service bulletin. The software of the ECM needs to be updated. |