# Service bulletin 52029737A$

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10121688
- Published by NHTSA: 2017\-11\-03
- Manufacturer's number: 52029737A$
- Manufacturer's date: 2016\-07\-20
- NHTSA component: FUEL SYSTEM, DIESEL; ENGINE AND ENGINE COOLING:ENGINE:OTHER FUEL TYPES:TURBO/SUPERCHARGER

## NHTSA's summary

TANK, Diesel Exhaust Fluid, Part Includes Temp Sensor and Level Sensor For DS and WK vehicles ONLY; If the urea tank is being replaced due to P249C or P203E on a 2014\-2016 model year 3.0L Turbo Diesel \(EXF\) on DS or WK, please call Indra Djutrisno at cell \(248\) 892\-3473. If no response is received within 15 minutes, please continue with repair.\~

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10121688-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10121688-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine, Fuel system, Turbocharger or supercharger

## Trouble codes named

P203E, P249C

## Vehicles listed

- 2014 to 2016 JEEP GRAND CHEROKEE
- 2014 to 2016 RAM 1500

## Other bulletins for the same vehicles and component

- [68225378A$](/bulletins/10181461.md), 2020-10-26, Service bulletin: ELECTRICAL SYSTEM; ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:TURBO/SUPERCHARGER; EQUIPMENT; EQUIPMENT ADAPTIVE/MOBILITY. 3.0L V6 Turbo Diesel \- Sales Code EXF A crankshaft locking tool marked 630 is installed on all 3.0L EXF long blocks \(Lower rear left side of block under starter location\). This tool locks the crankshaft at 30? ATDC. Refer to: Valve Timing ? Standard Procedure ? LOCKING ENGINE 30 DEGREE AFTER TDC IN TechCONNECT for further details. This tool must be removed after the the injection pump has been installed on the engine. The tool will be replaced with the engine block plug from the engine being removed. The engine will not turn over with this tool installed.\~

JSON: [/v1/bulletins/10121688](/v1/bulletins/10121688)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2052029737A%24&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10121688&vehicle=Service%20bulletin%2052029737A%24)