# Service bulletin Customer Letter

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10121385
- Published by NHTSA: 2017\-10\-31
- Manufacturer's number: Customer Letter
- Manufacturer's date: 2013\-08\-30
- NHTSA component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

Audi has determined that a faulty fuel injector may cause minor misfire conditions and, in turn, cause the Malfunction Indicator Lamp \(MIL\) on the instrument cluster to illuminate due to the presence of specific fault codes caused by this component. In our continuing efforts to assure proper performance of Audi vehicles, your dealer will diagnose and replace a faulty fuel injector, if necessary, at no cost to you as long as the vehicle remains within the time and mileage limits of this warranty extension. Please keep this letter with your Warranty booklet and deliver it to any new owner, along with the owner?s manual.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2013/MC-10121385-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2013/MC-10121385-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Instrument cluster

## Vehicles listed

- 2009 to 2010 AUDI A4
- 2011 AUDI A4 AVANT
- 2009 to 2011 AUDI A5
- 2010 to 2011 AUDI A5 CABRIOLET
- 2011 AUDI Q5
- 2011 AUDI S4
- 2009 to 2011 AUDI S5

## Other bulletins for the same vehicles and component

- [A9023562032113\_8](/bulletins/10246152.md), 2023-12-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides general information about the outside air temperature reading.
- [A9023322059335\_4](/bulletins/10240154.md), 2023-08-04, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin provides information for when there is noise from the area around the instrument cluster.
- [371422202898511](/bulletins/10226521.md), 2022-11-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); LANE DEPARTURE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Transmission warning message in cluster \(P074100 stored in TCM\)
- [37139720289859](/bulletins/10226516.md), 2022-11-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Transmission warning message in cluster, P074100 stored in TCM
- [37131720290278](/bulletins/10226505.md), 2022-11-21, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; LANE DEPARTURE. Transmission warning message in cluster
- [A9022582059335\_3](/bulletins/10210527.md), 2022-05-05, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This bulletin contains information on noises from the instrument cluster installation area.
- [37 14 46 2025535](/bulletins/10210695.md), 2022-05-02, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); UNKNOWN OR OTHER; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. If the memory is read with guided fault finding \(GFF\) or if Immobilizer test plans are performed, the above DTC entries may be stored due to a communication error between the VAS tester and the TCM. \(In particular, the issue happens with tester VAS 5051B\).
- [37 14 45 2028405](/bulletins/10210694.md), 2022-05-02, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; POWER TRAIN; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE. A software change in the diagnosis function was made. Customer may report that the transmission warning light is on.
- [37 14 34 2028985](/bulletins/10210683.md), 2022-05-02, Service bulletin: ELECTRICAL SYSTEM:IGNITION; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE; UNKNOWN OR OTHER; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Transmission warning may appear in instrument cluster. After ignition cycle, the warning message is no longer present. The fault occurs with ATF temperature below 60o C. Check for this temperature range in the extended environmental conditions of the diagnosis protocol. This TSB only applies if the ATF level is correct and there are no leaks.
- [A9021982059335\_2](/bulletins/10191544.md), 2021-05-06, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; ELECTRICAL SYSTEM. This bulletin contains information on noises from the instrument cluster installation area.

JSON: [/v1/bulletins/10121385](/v1/bulletins/10121385)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20Customer%20Letter&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10121385&vehicle=Service%20bulletin%20Customer%20Letter)