Service bulletin ITB16-040
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10120581 |
| Published by NHTSA | 2017-10-25 |
| Manufacturer's number | ITB16-040 |
| Manufacturer's date | 2016-10-05 |
| NHTSA component | VISIBILITY |
NHTSA's summary
2013 JX35 AND 2014 ? 2015 QX60; DOOR MIRROR GLASS WILL NOT RETURN AFTER SHIFTING REVERSE TO DRIVE Applies to vehicles equipped with Automatic Drive Positioner IF YOU CONFIRM The door mirror glass (LH and RH) automatic tilt down-up feature does not return the glass to original position after shifting from reverse to drive. ACTION Replace the Automatic Drive Positioner (ADP) Control Unit. - Use the new part listed in the Parts Information. - Refer to the Electronic Service Manual (ESM), section ADP-Automatic Drive Positioner, for replacement information.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Glass, wipers and mirrors
| INFINITI JX35 | 2013 |
|---|---|
| INFINITI Q50 HYBRID | 2014, 2015 (the catalog's model; the bulletin names a series or trim of it) |
| INFINITI QX60 | 2014, 2015 |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| ITB17-009H | 2024-06-07. Service bulletin. WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
|---|---|
| ITB13-007I | 2024-06-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB09-039K | 2024-06-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB13-007H | 2023-03-07. Service bulletin. REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB09-039J | 2023-03-07. Service bulletin. WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin. |
| ITB09039C | 2021-05-10. Service bulletin. SERVICE INFORMATION The purpose of this bulletin is to give Infiniti dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail. |
| ITB13007A | 2021-05-10. Service bulletin. SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details. |
| ITB15032 | 2021-05-10. Service bulletin. SERVICE INFORMATION Power moonroof initialization procedures for the Applied Vehicles have been revised. The procedure described in this bulletin differs from the procedure in the Electronic Service Manual (ESM). At a later date and where possible, the applicable ESMs will be updated with the revised procedures. Follow the procedure in this bulletin should the power moonroof in an Applied Vehicle need to be initialized. See this bulletin for further detail. |
| ITB10037D | 2021-05-10. Service bulletin. SERVICE INFORMATION The Applied Vehicles are equipped with a new version of Intelligent Key presets memory. Each Intelligent Key can be programmed to have its own unique set of presets for certain vehicle systems. Vehicle systems that are linked with Intelligent Key include: - Automatic Drive Positioner (includes driver seat, steering column, and mirror position memory) - Audio (station presets, etc.) - Auto air conditioning and heating (retains the last temperature and mode setting for each Intelligent Key user) - Navigation system (retains the last settings [e.g., Birdview] and clock display preference for each Intelligent Key user) See this bulletin for further detail. |
| ITB14039B | 2021-05-10. Service bulletin. IF YOU CONFIRM A strong sulfur like odor is coming from the Moonroof drain hoses after a hot soak (after sitting with doors and windows closed). - Odor is most noticeable if the Moonroof shade is left closed while the vehicle sits in the direct sunlight and then after a hot soak the Moonroof shade is opened. NOTE - The Moonroof drain hoses MUST be the cause of the strong sulfur like odor for this bulletin to apply. ACTION Replace the Moonroof drain hoses with the Service Procedure starting on the next page AND deodorize with an ozone generator as needed AND THEN replace in-cabin microfilter. See this bulletin for further detail. |