# Service bulletin NTB17\-041

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10120557
- Published by NHTSA: 2017\-10\-25
- Manufacturer's number: NTB17\-041
- Manufacturer's date: 2017\-04\-13
- NHTSA component: SERVICE BRAKES, AIR:SUPPLY:QUICK RELEASE VALVE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\)

## NHTSA's summary

ADDITIONAL SERVICE WHEN REPLACING CONTROL VALVE OR TRANSAXLE ASSEMBLY SERVICE INFORMATION After a CVT assembly or control valve replacement, additional service must be completed with CONSULT\-III plus \(C\-III plus\). \- The original calibration data must first be erased from the TCM and then newcalibration data written. \- If the calibration data is not erased, the vehicle can experience drivability concernswhich may result in a CVT issue. Additional Service when Replacing Control Valve or Transaxle Assembly \- The following procedures, starting on the next page, must be performed in thisorder. \- Check off procedure as they are performed in the order listed below.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10120557-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10120557-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Brakes, Transmission and driveline, Automatic transmission, Transmission control module

## Vehicles listed

- 2013 to 2017 NISSAN SENTRA
- 2013 to 2017 NISSAN VERSA
- 2014 to 2017 NISSAN VERSA NOTE

## Other bulletins for the same vehicles and component

- [NTB18\-055E](/bulletins/10200015.md), 2021-08-06, Service bulletin: EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT; POWER TRAIN. CVT FLUID LEVEL QUICK CHECK GAUGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB14\-118B](/bulletins/10194178.md), 2021-05-24, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT. Judder on Deceleration under 15 MPH
- [NTB15110A](/bulletins/10192814.md), 2021-05-10, Service bulletin: ELECTRICAL SYSTEM:IGNITION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. IF YOU CONFIRM \* The key cannot be removed from the ignition. And/or \* The Shifter will not move out of park. NOTE: For Rogue \(T32\), it is possible that shifter selector knob may not be installed correctly. Please refer to NTB14\-058 for shift selector knob service information before applying this bulletin. ACTION a. Adjust the key interlock cable. b. Adjust the stop lamp switch. NOTE: Nissan vehicle warranty does not cover incidents due to lack of vehicle maintenance and/or physical damage. Refer to New Vehicle Limited Warranty in the Nissan Assurance Products Resource Manual \(APRM\) for warranty coverage guidelines and complete information regarding warranty coverage. Please see this bulletin for further details.
- [NTB14118B](/bulletins/10192795.md), 2021-05-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT. IF YOU CONFIRM: When driving an Applied Vehicle below 15 mph, a judder or shake \(pulsing sensation, or fore/aft sensation\) occurs while slowing to a stop, and no DTCs are stored. ACTION: 1. Confirm this bulletin applies. 2. If this bulletin applies, reprogram the TCM. NOTE: If a customer voluntarily chooses to have this specification change made to their vehicle, they should be advised that their actual MPG may \(or may not\) slightly decrease \(up to 0.4mpg\) as a result, depending on their driving habits and other conditions. See this bulletin for further detail.
- [NTB14057A](/bulletins/10192615.md), 2021-05-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. SERVICE INFORMATION The information in this bulletin is provided to help ensure correct diagnosis and repair of fluid leaks. All fluid leaks, when properly diagnosed, should be repaired \(whether under warranty or customer pay\) to ensure proper vehicle operation. However, certain normal operating conditions can be misdiagnosed as a leak requiring repair. Unnecessary repair or replacement of parts in connection with incorrectly diagnosed "leaks" can negatively impact customer satisfaction, be time consuming and costly, and if not performed correctly can lead to future repairs. See this bulletin for further detail.
- [NTB13077A](/bulletins/10192421.md), 2021-05-10, Service bulletin: EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT. SERVICE INFORMATION Applied vehicles equipped with a CVT have a "cap" that appears to be a fluid level gauge. This "cap" will NOT have a gauge or "dipstick". This is normal. Do NOT replace the "cap" because it is thought to have a "dipstick". The fluid level is not checked from this location. The fluid level for applied vehicles is checked from the oil pan \(refer to the appropriate section of the Electronic Service Manual \[ESM\]\). Whenever checking, filling, or topping off a CVT's fluid level of an applied vehicle for any reason, use the procedure outlined in the appropriate section of the ESM. See this bulletin for further detail.
- [NTB14008](/bulletins/10192324.md), 2021-05-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:CVT; EQUIPMENT. SERVICE INFORMATION If for any reason you need to replace the CVT Oil Warmer/Cooler on an Applied Vehicle, it is now available as a service part. See this bulletin for further information.
- [NTB19\-075a](/bulletins/10172242.md), 2020-03-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. 2013\-2017 SENTRA; CVT JUDDER This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB19\-015](/bulletins/10154727.md), 2019-03-18, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. 2014 ? 2019 VERSA NOTE; ENGINE SUPPORT SPECIAL SERVICE TOOL FOR CVT REMOVAL AND INSTALLATION SERVICE INFORMATION A new Engine Support Tool and Engine Support Bracket are now available to allow the CVT to be removed from the Applied Vehicles without having to remove the engine. The procedure in this bulletin is different than those that are currently in the Electronic Service Manuals \(ESMs\), which will be updated with this information at a later date.
- [NTB18\-058b](/bulletins/10154723.md), 2019-03-18, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. 2013\-2017 SENTRA; ENHANCED DIAGNOSTIC LOGIC FOR CVT This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.

JSON: [/v1/bulletins/10120557](/v1/bulletins/10120557)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB17-041&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10120557&vehicle=Service%20bulletin%20NTB17-041)