# Service bulletin ITB16\-046

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10119263
- Published by NHTSA: 2017\-10\-15
- Manufacturer's number: ITB16\-046
- Manufacturer's date: 2016\-11\-18
- NHTSA component: WHEELS

## NHTSA's summary

ESM CORRECTIONS FOR FRONT WHEEL ALIGNMENT SPECIFICATIONS SERVICE INFORMATION For the Applied Vehicles listed above, some front wheel alignment specifications listed in the Electronic Service Manual \(ESM\), section FSU\-Front Suspension, were listed incorrectly and have been corrected. \- Updated ESMs will be distributed to the field as quickly as possible. \- Until the updated ESMs are made available, please use the corrected specifications listed in this bulletin. \- Specification areas that have corrections are outlined with a Red box on the following pages.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10119263-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10119263-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Wheels

## Vehicles listed

- 2016 to 2017 INFINITI Q50
- 2016 to 2017 INFINITI Q50 HYBRID
- 2017 INFINITI Q60
- 2016 to 2017 INFINITI Q70
- 2016 to 2017 INFINITI Q70 HYBRID
- 2016 to 2017 INFINITI QX50
- 2016 to 2017 INFINITI QX80

## Other bulletins for the same vehicles and component

- [ITB10\-067C](/bulletins/10232645.md), 2023-03-07, Service bulletin: WHEELS. WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [ITB13039A](/bulletins/10192639.md), 2021-05-10, Service bulletin: BACK OVER PREVENTION; WHEELS; SERVICE BRAKES; LANE DEPARTURE. SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System \(TPMS\) and Low Tire Pressure Warning System \(LTPWS\) information for: \- Basic diagnosing of TPMS/LTPWS systems \- Radio frequency interference causing a "No Data" \(C1708, C1709, C1710, C1711\) condition \- Sensor leaks \- Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration \- Air pressure changes with altitude and ambient temperatures \- Aftermarket tire sealers \- Aftermarket wheels \- Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- [ITB15020](/bulletins/10192573.md), 2021-05-10, Service bulletin: WHEELS. SERVICE INFORMATION The appearance of painted alloy wheels can be damaged if acidic cleaners are used. DO NOT use Chrome Wheel Cleaner on Painted Wheels. Many chrome wheel cleaners have acidic ingredients. Make sure to follow all instruction in the Appearance and Care Section of the Owner?s Manual. Damage to wheel appearance due to the use of inappropriate chemicals or cleaning products is not covered under warranty. See this bulletin for further detail.
- [ITB20\-003](/bulletins/10172177.md), 2020-03-06, Service bulletin: WHEELS; TIRES:VALVE; TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS. 2014\-2020 Q50 AND 2017\-2020 Q60; TPMS SENSOR LEAKING AIR IF YOU CONFIRM The vehicle has the original equipment wheels and TPMS sensors \(tire pressure sensors\) installed. AND The owner states that one or more tires has a continuous air leak or looses air pressure multiple times over a 30 day period \(approximatively 1 psi every 3 days\). NOTE: The TPMS warning lamp may be ON \(not flashing\) with one or more of the following DTCs stored: • \- C1704, C1705, C1706, C1707, C1730, C1731, C1732, C1733 • \- If the TPMS warning lamp is flashing for more than one \(1\) minute this bulletin does not apply. Refer to the Electronic Service Manual \(ESM\) for further diagnostic information. ACTION 1. Confirm that air is leaking between the tire pressure sensor’s valve stem and valve nut of the affected wheel/tire. 2. Replace the valve stem washer/seal and the valve nut and then torque to the new specification.
- [ITB16\-046a](/bulletins/10138254.md), 2018-05-21, Service bulletin: WHEELS; SUSPENSION. REVISED WHEEL ALIGNMENT SPECIFICATIONS This bulletin has been amended. The APPLIED VEHICLES were updated with new models and model years. No other changes have been made. Discard previous versions of this bulletin.
- [ITB11\-005d](/bulletins/10136642.md), 2018-05-14, Service bulletin: WHEELS; ELECTRONIC STABILITY CONTROL \(ESC\). WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
- [ITB11\-005c](/bulletins/10118678.md), 2017-10-12, Service bulletin: EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; WHEELS. WHEEL BALANCING SERVICE INFORMATION This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.

JSON: [/v1/bulletins/10119263](/v1/bulletins/10119263)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20ITB16-046&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10119263&vehicle=Service%20bulletin%20ITB16-046)