# Service bulletin NTB17\-106

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10118711
- Published by NHTSA: 2017\-10\-12
- Manufacturer's number: NTB17\-106
- Manufacturer's date: 2017\-09\-25
- NHTSA component: SEATS

## NHTSA's summary

2017\-2018 PATHFINDER; 2ND ROW SEAT HANDLE "CARGO MODE" CHANGE SERVICE INFORMATION A change has been made to the 2nd row seat handles in the Applied Vehicles. Vehicles produced between August 15, 2017 and September 8, 2017 \(see VIN information below\) are equipped with 2nd row seat handles that have "CARGO MODE" displayed on them \(Figure 1\). Applied Vehicles built before and after the time period shown above are equipped with blank seat handles \(Figure 2\). Vehicles built BETWEEN: Almond interior: 5N1\(\*\)R2M\(\*\*\)HC 914247 to 5N1\(\*\)R2M\(\*\*\)JC 608295 Charcoal interior: 5N1\(\*\)R2M\(\*\*\)HC 914269 to 5N1\(\*\)R2M\(\*\*\)JC 608335 ARE equipped with 2nd row seat handles with "CARGO MODE" displayed on them. The Nissan New Vehicle Limited Warranty does not cover replacement of a "CARGO MODE" handle \(correctly built vehicle\) with a blank handle. Refer to the Nissan Assurance Products Resource Manual \(APRM\) for guidelines on warranty coverage. The vehicle owner's manual contains the complete details regarding the limited warranty.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10118711-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10118711-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Seats

## Vehicles listed

- 2017 to 2018 NISSAN PATHFINDER

## Other bulletins for the same vehicles and component

- [NTB19\-071C](/bulletins/10234044.md), 2023-04-10, Service bulletin: SEATS; AIR BAGS. DTC B00A0\-00 STORED This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- [NTB20\-008](/bulletins/10172249.md), 2020-03-07, Service bulletin: SEATS; EQUIPMENT ADAPTIVE/MOBILITY; EQUIPMENT. 2013\-2019 PATHFINDER; CLIMATE CONTROLLED SEAT INOPERATIVE IF YOU CONFIRM The driver or passenger side climate controlled seat: • \- Heating and cooling features do not operate And • \- The harness connector or control unit of the climate controlled seat appears as shown in Figure 3 or Figure 5. ACTION Perform the following to the affected seat: A. Replace the climate controlled seat control unit. B. Drill a hole for the new harness clip. C. Replace the harness connector of the climate controlled seat control unit.

JSON: [/v1/bulletins/10118711](/v1/bulletins/10118711)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20NTB17-106&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10118711&vehicle=Service%20bulletin%20NTB17-106)
