# Service bulletin 15003173284

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10118125
- Published by NHTSA: 2017\-09\-27
- Manufacturer's number: 15003173284
- Manufacturer's date: 2017\-05\-11
- NHTSA component: EXTERIOR LIGHTING:FOG LIGHTS; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL

## NHTSA's summary

? After installing the new Forward Sensing Camera \(FSC\), frequency of the disabled function with the LDWS/HBC warning lights ON due to foggy FSC lens will be reduced. However, the warning message will be displayed on the Multi\-Information Display \(MID\) or the center display when FSC lens is foggy. ? The foggy FSC lens may occur at some weather conditions and is not caused by a defect of the parts. When the warning message is displayed, drive the vehicle for 10 minutes or more with the defroster ON to defogthe FSC lens.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10118125-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10118125-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Equipment and accessories, Labels and manuals, Lighting

## Vehicles listed

- 2016 to 2017 MAZDA CX\-3
- 2016 MAZDA CX\-5
- 2016 MAZDA MAZDA6

## Recalls for the same vehicles and component

- [2020040](/recalls/tc/2020040.md), 2020-02-06: Lights And Instruments
- [20V063000](/recalls/nhtsa/20V063000.md), 2020-02-06: EXTERIOR LIGHTING:HEADLIGHTS

## Other bulletins for the same vehicles and component

- [09\-041\-24](/bulletins/11006899.md), 2024-09-04, Service bulletin: EXTERIOR LIGHTING. Some customers may notice water entry into the front combination lights \(as shown below\). This is due to poor sealing where rain or other water can enter inside the light. To eliminate this concern, the shape of the front combination light has been changed to improve sealing ability.
- [SA\-027\-24](/bulletins/10254187.md), 2024-05-04, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; UNKNOWN OR OTHER. Some customers may complain about infotainment center display. Peeling, spider cracks and white dots.
- [SA\-008\-24](/bulletins/10251368.md), 2024-03-06, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT. Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- [09\-003\-23b](/bulletins/10248385.md), 2024-01-06, Service bulletin: EQUIPMENT:ELECTRICAL:INFOTAINMENT. Some customers may complain about infotainment center display: Center display touchscreen operates by itself \(Ghost Touch\). The film of the center display may be peeled off. White dots may appear on the center display NOTE: The occurrence of the symptoms depends on the vehicle model and the parts.
- [SA\-032\-23a](/bulletins/10244679.md), 2023-11-02, Service bulletin: ENGINE AND ENGINE COOLING; ELECTRICAL SYSTEM; EQUIPMENT ADAPTIVE/MOBILITY. If you encounter any type of electrical concern \(e.g, dead battery, engine no start, DTC\(s\) stored...\), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- [09\-032\-23](/bulletins/10243551.md), 2023-10-05, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; BACK OVER PREVENTION. SERVICE BULLETIN 09\-031/20 ISSUED ON 09/21/20 IS NO LONGER VALID. IT IS SUPERCEDED BY RECALL 6023G \(“2014\-2018 MAZDA3 AND 2016\-2021 CX\-3 \- REARVIEW IMAGE MAY NOT DISPLAY PROPERLY”\).
- [09\-031\-20b](/bulletins/10240431.md), 2023-08-04, Service bulletin: VISIBILITY; EQUIPMENT ADAPTIVE/MOBILITY. Some vehicles may exhibit a distorted image or no image from the rear mount camera when shifted into reverse. Due to friction, the coating of camera socket terminals may wear out, creating high electrical resistance. NOTE: The icons and the messages are displayed normally.
- [09\-031/20a](/bulletins/10240427.md), 2023-08-04, Service bulletin: VISIBILITY; EQUIPMENT ADAPTIVE/MOBILITY. Be advised that TSB "09\-031/20 \- REAR MOUNT CAMERA IMAGE NOT CLEAR/NO IMAGE ON SCREEN" is no longer valid and has been superseded by "RECALL 6023G \- 2014\-2018 MAZDA3 AND 2016\-2019 CX\-3 \- REARVIEW IMAGE MAY NOT DISPLAY PROPERLY". Use the link below to view the recall: RECALL 6023G \- 2014\-2018 MAZDA3 AND 2016\-2019 CX\-3 \- REARVIEW IMAGE MAY NOT DISPLAY PROPERLY
- [SA\-036\-23](/bulletins/10238697.md), 2023-07-05, Service bulletin: STRUCTURE; EQUIPMENT. Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
- [SA\-016\-23](/bulletins/10233669.md), 2023-04-04, Service bulletin: EQUIPMENT:ELECTRICAL. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method. B. Auxiliary Key Code Cut Method

JSON: [/v1/bulletins/10118125](/v1/bulletins/10118125)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2015003173284&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10118125&vehicle=Service%20bulletin%2015003173284)