# Service bulletin 16\-NA\-037

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10116881
- Published by NHTSA: 2017\-08\-31
- Manufacturer's number: 16\-NA\-037
- Manufacturer's date: 2016\-02\-09
- NHTSA component: FORWARD COLLISION AVOIDANCE: SENSING SYSTEM

## NHTSA's summary

This technical bulletin provides a procedure to reprogram the active safety control module for vehicles with the condition of collision/detection system inoperative

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10116881-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10116881-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance

## Vehicles listed

- 2013 to 2014 CADILLAC ATS
- 2014 CADILLAC CTS
- 2015 CADILLAC ESCALADE
- 2015 CADILLAC ESCALADE ESV
- 2013 to 2015 CADILLAC SRX
- 2013 to 2014 CADILLAC XTS

## Other bulletins for the same vehicles and component

- [PIT5551P](/bulletins/11011406.md), 2024-12-05, Service bulletin: FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
- [PI0430B](/bulletins/10254209.md), 2024-05-06, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); ELECTRICAL SYSTEM; SUSPENSION. Magnetically Controlled Suspension Electrical Connector Not Seated.
- [PI0401B](/bulletins/10254204.md), 2024-05-06, Service bulletin: BACK OVER PREVENTION. Rear Vision Camera Appears Obstructed.
- [PIE0301](/bulletins/10253130.md), 2024-04-15, Service bulletin: LANE DEPARTURE: BLIND SPOT DETECTION. Engineering Information
- [PIT4322P](/bulletins/10251708.md), 2024-03-18, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\). This Preliminary Information communication provides information to the technician about vehicles that have an unwanted Stability Activation and/or a Service Stability message on the Driver Information Center. Technician may find a Diagnostic Trouble Code C0710. Technician should inspect for vehicles modifications before any in\-depth diagnostics are performed.
- [PIT5551N](/bulletins/10251704.md), 2024-03-18, Service bulletin: FORWARD COLLISION AVOIDANCE. This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert".
- [15NA082B](/bulletins/10250048.md), 2024-02-12, Service bulletin: BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps
- [15NA082](/bulletins/10250047.md), 2024-02-12, Service bulletin: BACK OVER PREVENTION. Clunking Noise from Front of Vehicle During Turns and/or Bumps
- [PIC6123G](/bulletins/10249269.md), 2024-01-29, Service bulletin: LANE DEPARTURE; FORWARD COLLISION AVOIDANCE: ADAPTIVE CRUISE CONTROL. This Preliminary Information communication provides information to the technician for the adaptive cruise control or lane keep assist unavailable message in the driver?s information center after the vehicle has been parked in direct sunlight and high ambient temperatures. The cameras electronic control unit?s internal operating temperature range is \-40 degrees Celsius to 85 degrees Celsius. If the temperature of the electronic control unit of the camera module exceeds 85 degrees Celsius the image processor will no longer function resulting in adaptive cruise control and lane keep assist to be unavailable until the temperature falls to below the maximum operating temperature range
- [PIT4322G](/bulletins/10247650.md), 2023-12-26, Service bulletin: ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\). Unwanted Stability Activation and/or C0710.

JSON: [/v1/bulletins/10116881](/v1/bulletins/10116881)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2016-NA-037&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10116881&vehicle=Service%20bulletin%2016-NA-037)