WenmarOpen by Wenmar Pro

Service bulletin 17-NA-056

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10116641
Published by NHTSA2017-08-31
Manufacturer's number17-NA-056
Manufacturer's date2017-02-28
NHTSA componentELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

NHTSA's summary

This informational bulletin explains that all vehicles are shipped with the F-3 fuse and if the fuse has been removed for inventory, not to submit a claim to replace the fuse.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Electrical system, Wiring and fuses

Vehicles listed
CHEVROLET LOW CAB FORWARD 45002017
CHEVROLET LOW CAB FORWARD 55002017
CHEVROLET SILVERADO 35002016, 2017 (the catalog's model; the bulletin names a series or trim of it)

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
228602024-01-08. Service bulletin. Harness Trapped Under MBEC
17-NA-2192021-04-14. Service bulletin. Diagnostic Tip for Malfunction Indicator Lamp (MIL) Illuminated - DTC P249D, P249E, U029D, U029E Set Some customers may comment that the MIL is illuminated. The technician may find one or more of the following DTCs set: • U029D • U029E • P249D • P249E Note: The graphic above depicts an example of a torn and missing seal. • Moisture intrusion past a damaged (1) seal located in the connector for the NOx sensor wiring harness. • Missing (2) seal located in the connector for the NOx sensor wiring harness. Correction If you encounter a vehicle with the above concern, perform normal diagnostics for the codes set. ⇒ If diagnostics lead to NOx sensor replacement, inspect the mating chassis electrical connector for corrosion. Clean and repair as necessary.
PIT5311F2020-08-10. Service bulletin. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have an intermittent "Check Trailer Wiring" or "Service Trailer Brake" message on the Driver Information Center. Technician will inspect and clean the ground wire (normally white wire) connection on the trailer side of the 7-pin connector. Inspect that the wires inside the trailer side connector are clean and securely fastened. If the vehicle?s 7-way connector socket terminals are deformed or have excessive wear, it will be necessary to replace the truck side connector with part number 23404450.
100089005G2019-05-13. Service bulletin. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
PIE0499B2019-04-22. Service bulletin. This engineering informational bulletin is requesting information and document the exact location of the wire chafing by taking a photo of the flex fuel pigtail as it appears BEFORE repairs are made.
PIE04992019-03-25. Service bulletin. This engineering informational bulletin is requesting information and document the exact location of the wire chafing by taking a photo of the flex fuel pigtail as it appears BEFORE repairs are made.
100089005H2019-03-18. Service bulletin. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
PIP5335B2018-08-06. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Codes P0340 and P0341 setting at times. Technician should use normal published Service Information diagnostics. If normal Service Information diagnostics does not isolate the concern, inspect for corrosion in connector X154 located on the front cover next to the vacuum pump.
18NA0792018-05-21. Service bulletin. This technical bulletin provides a procedure to replace the drivers front door window regulator motor and door wiring harness if water and/or corrosion is found in the connectors.
10-00-89-005E2018-05-21. Service bulletin. This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.