# Service bulletin 16\-NA\-412

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10116551
- Published by NHTSA: 2017\-08\-31
- Manufacturer's number: 16\-NA\-412
- Manufacturer's date: 2017\-01\-20
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

This technical bulletin provides a procedure to reprogram the ECM to correct multiple transmission concerns.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10116551-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10116551-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Transmission and driveline, Automatic transmission

## Vehicles listed

- 2016 CHEVROLET SILVERADO 2500
- 2016 GMC SIERRA 2500
- 2016 GMC SIERRA DENALI
- 2016 GMC YUKON
- 2016 GMC YUKON XL

## Other bulletins for the same vehicles and component

- [17\-NA\-066](/bulletins/10239647.md), 2023-07-25, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
- [16\-NA\-130](/bulletins/10232711.md), 2023-03-08, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY. This service bulletin provides information for after installation of a replacement upper valve body, the transmission may have no Reverse and no 2nd gear.
- [PIP5621C](/bulletins/10224285.md), 2022-10-17, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); POWER TRAIN. This Preliminary information communicates to the dealer technician that TAC recommends the utilization of the GDS2 software to aid in diagnosing automatic transmission concerns. TAC is requesting the GDS2 session logs be sent in before the dealer contacts TAC.
- [21NA199](/bulletins/10207911.md), 2022-02-14, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY. This informational bulletin advises the technician to replace the TBV if the transmission has any type of repair even if no problem was found, to replace the tbv.
- [15\-NA\-083](/bulletins/10201118.md), 2021-09-07, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Recovery Process from a Controller Reprogramming Interruption
- [06\-00\-89\-031D](/bulletins/10201098.md), 2021-09-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [990420002L](/bulletins/10200154.md), 2021-08-09, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
- [17336\-02](/bulletins/10191037.md), 2021-04-29, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. On some 2015\-2017 model year Cadillac Escalade, Escalade ESV, Chevrolet Suburban, Tahoe, GMC Yukon and Yukon XL vehicles, may have a condition where thermal cycling on the combination transmission fluid/oil and AC condenser cooler creates a crack that may allow refrigerant to escape. This condition consequently may deactivate the AC system which may cause potential customer annoyance
- [06\-00\-89\-031D](/bulletins/10190503.md), 2021-04-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [15\-NA\-083](/bulletins/10190387.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). Recovery Process from a Controller Reprogramming Interruption During service reprogramming of the T87 TCM, some technicians may notice the TCM may fail during the reprogramming event and become unresponsive to the Service Programming System \(SPS\), unresponsive to the GDS2 tool. This bulletin addresses corrective actions to attempt to recover the module before declaring the TCM as a bad part and replacing. During reprogramming, an interruption can cause the module to lock up. A module reset may recover the TCM

JSON: [/v1/bulletins/10116551](/v1/bulletins/10116551)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2016-NA-412&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10116551&vehicle=Service%20bulletin%2016-NA-412)