# Service bulletin SSM73358

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10116177
- Published by NHTSA: 2017\-08\-25
- Manufacturer's number: SSM73358
- Manufacturer's date: 2017\-04\-27
- NHTSA component: BACK OVER PREVENTION: CAMERA SYSTEM

## NHTSA's summary

Issue: Rear Camera replacement

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2017/MC-10116177-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2017/MC-10116177-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2016 LAND ROVER DISCOVERY
- 2015 LAND ROVER DISCOVERY SPORT
- 2017 LAND ROVER RANGE ROVER SPORT

## Other bulletins for the same vehicles and component

- [SSM71864](/bulletins/10239287.md), 2023-07-17, Service bulletin: ELECTRICAL SYSTEM; BACK OVER PREVENTION. When returning failed parts through warranty it has been found that the rubber surround is still attached to the camera lens. This applies to both high line and low line rear camera.
- [LTB00814NAS4](/bulletins/10189256.md), 2021-03-22, Service bulletin: SERVICE BRAKES; SUSPENSION; BACK OVER PREVENTION. The underhood lower Noise Vibration Harshness \(NVH\) pads and dirty air duct guides may show signs of ripping, tearing, and/or has a poor finish.
- [LTB01108NAS2](/bulletins/10189057.md), 2021-03-15, Service bulletin: BACK OVER PREVENTION. In response to customer feedback on the performance of the InControl® Touch Pro? system, Jaguar Land Rover has developed a software upgrade designed to enhance/introduce the following features and functions: ? Introduction of text message capability to the InControl® Touch Pro? system. ? Navigation screen supports switching between 'Night' and 'Day' mode. ? User able to synchronize the locations between the InControl Application \(ICA\) and the vehicle navigation system. ? Improved Bluetooth® connectivity. ? 'Camera System Not Available, Consult Your Dealer' pop\-up message displayed when selecting reverse \(R\). ? Screen blank when restarting the vehicle after an immediate shut\-down. ? 'DVD Disc Error' is displayed on the Touchscreen \(TS\) after a Digital Versatile Disc \(DVD\) is inserted.
- [SSM72050](/bulletins/10189051.md), 2021-03-15, Service bulletin: BACK OVER PREVENTION. Issue: Following replacement of front Air Struts Dealers / Customer may report a noise or a vehicle lean error state. On investigation the front Air Spring is found to be misaligned and damaged.
- [SSM73640](/bulletins/10189028.md), 2021-03-15, Service bulletin: BACK OVER PREVENTION; ENGINE. Issue: Customers driving various Land Rover/Range Rover products manufactured from 14MY onwards have reported a high frequency ?squeak? or ?squeal? noise from the front or rear of their vehicles, observed most noticeably whilst driving over speed bumps or uneven road surfaces. Technicians have resolved the complaints by replacing front or rear anti\-roll bar \(ARB\) bushes. Investigations into returned components by both JLR and component suppliers have not been able to identify causal factors for the original complaint.
- [LTB01029NAS2](/bulletins/10136681.md), 2018-05-14, Service bulletin: SERVICE BRAKES, HYDRAULIC; AIR BAGS; BACK OVER PREVENTION. A noise from front brake system during light brake pedal application may be evident, mostly from cold start in colder ambient temperatures and typically does not re\-occur after the brakes have warmed up.
- [SSM73421](/bulletins/10125230.md), 2017-12-14, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code \(DTC\) B12BD\-31 "Rear Camera \- No Signal" and or U1A4B\-49 "Control Module Processor B \- Internal Failure" stored in the Image Processing Module B \(IPMB\). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
- [SSM73421](/bulletins/10116978.md), 2017-09-08, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code \(DTC\) B12BD\-31 ?Rear Camera \- No Signal? and or U1A4B\-49 ?Control Module Processor B ? Internal Failure? stored in the Image Processing Module B \(IPMB\). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
- [SSM73246](/bulletins/10116160.md), 2017-08-25, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. Parking lines may dissapear after rear camera replacement.
- [SSM72579](/bulletins/10106168.md), 2017-06-13, Service bulletin: BACK OVER PREVENTION: WARNINGS; ELECTRICAL SYSTEM. REAR PARK AID MAY BE INOPERATIVE

JSON: [/v1/bulletins/10116177](/v1/bulletins/10116177)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM73358&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10116177&vehicle=Service%20bulletin%20SSM73358)