WenmarOpen by Wenmar Pro

Service bulletin SSM73246

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10116160
Published by NHTSA2017-08-25
Manufacturer's numberSSM73246
Manufacturer's date2017-02-27
NHTSA componentBACK OVER PREVENTION: CAMERA SYSTEM

NHTSA's summary

Parking lines may dissapear after rear camera replacement.

The document

The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.

Components

Driver assistance, Backup camera

Vehicles listed
LAND ROVER DISCOVERY2016
LAND ROVER DISCOVERY SPORT2015
LAND ROVER RANGE ROVER SPORT2017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
SSM718642023-07-17. Service bulletin. When returning failed parts through warranty it has been found that the rubber surround is still attached to the camera lens. This applies to both high line and low line rear camera.
LTB00814NAS42021-03-22. Service bulletin. The underhood lower Noise Vibration Harshness (NVH) pads and dirty air duct guides may show signs of ripping, tearing, and/or has a poor finish.
LTB01108NAS22021-03-15. Service bulletin. In response to customer feedback on the performance of the InControl® Touch Pro? system, Jaguar Land Rover has developed a software upgrade designed to enhance/introduce the following features and functions: ? Introduction of text message capability to the InControl® Touch Pro? system. ? Navigation screen supports switching between 'Night' and 'Day' mode. ? User able to synchronize the locations between the InControl Application (ICA) and the vehicle navigation system. ? Improved Bluetooth® connectivity. ? 'Camera System Not Available, Consult Your Dealer' pop-up message displayed when selecting reverse (R). ? Screen blank when restarting the vehicle after an immediate shut-down. ? 'DVD Disc Error' is displayed on the Touchscreen (TS) after a Digital Versatile Disc (DVD) is inserted.
SSM720502021-03-15. Service bulletin. Issue: Following replacement of front Air Struts Dealers / Customer may report a noise or a vehicle lean error state. On investigation the front Air Spring is found to be misaligned and damaged.
SSM736402021-03-15. Service bulletin. Issue: Customers driving various Land Rover/Range Rover products manufactured from 14MY onwards have reported a high frequency ?squeak? or ?squeal? noise from the front or rear of their vehicles, observed most noticeably whilst driving over speed bumps or uneven road surfaces. Technicians have resolved the complaints by replacing front or rear anti-roll bar (ARB) bushes. Investigations into returned components by both JLR and component suppliers have not been able to identify causal factors for the original complaint.
LTB01029NAS22018-05-14. Service bulletin. A noise from front brake system during light brake pedal application may be evident, mostly from cold start in colder ambient temperatures and typically does not re-occur after the brakes have warmed up.
SSM734212017-12-14. Service bulletin. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 "Rear Camera - No Signal" and or U1A4B-49 "Control Module Processor B - Internal Failure" stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
SSM734212017-09-08. Service bulletin. Issue: Land Rover has received reports where during diagnosis of the surround camera system the Diagnostic Trouble Code (DTC) B12BD-31 ?Rear Camera - No Signal? and or U1A4B-49 ?Control Module Processor B ? Internal Failure? stored in the Image Processing Module B (IPMB). The DTC is a false flagging code that can lead to incorrect diagnosis of any camera related issue reported by the customer.
SSM733582017-08-25. Service bulletin. Issue: Rear Camera replacement
SSM725792017-06-13. Service bulletin. REAR PARK AID MAY BE INOPERATIVE