Service bulletin PIP5097
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10112896 |
| Published by NHTSA | 2017-08-15 |
| Manufacturer's number | PIP5097 |
| Manufacturer's date | 2013-03-06 |
| NHTSA component | STEERING |
NHTSA's summary
This Preliminary Information communication provides the technician with the following steps to correct a moan noise from the rear axle during cold turning maneuvers. This noise might start to be noticed as the vehicle accumulates over 3000 miles. The technician is to perform the following steps. 1. With original lube in axle, conduct Freeway Speeds for 10 miles to warm up lube. 2. Immediately drain original lube and refill with fresh lube. 3. In parking lot lock steering to the right, and then execute 5 Full Circles at (5-10 mph). 4. . In parking lot lock steering to the left, and then execute 5 Full Circles at (5-10 mph). 5. Perform 4 Figure 8?s at (5-10 mph). 6. Freeway Speeds for 20 miles until operating temperature is achieved. 7. In parking lot lock steering to the right, and then execute 5 Full Circles at (5-10 mph). 8. In parking lot lock steering to the left, and then execute 5 Full Circles at (5-10 mph). 9. Perform 4 Figure 8?s at (5-10 mph). 10. Immediately drain current lube in axle and refill with fresh lube. 11. Perform Steps 3 thru 9 again. 12. Immediately drain current lube in axle and refill with fresh lube. Proceed with steps 2 through 9 two times, for a total of 3 drain and fill procedures. This should only be done for a moan noise from the rear axle during cold start turning maneuvers. During regular maintenance the fluid only needs to be changed one time.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Steering
| CHEVROLET CAMARO | 2012, 2013 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| PI0281L | 2025-06-12. Service bulletin. This preliminary informational (PI) bulletin provides information to dealership personnel that may be helpful when addressing underbody component corrosion with customers. |
|---|---|
| 16-NA-109 | 2025-02-28. Service bulletin. This service bulletin provides a procedure inspecting for excess grease or Sealant on the Exterior of the steering gear due to seeing grease or sealant on certain locations on the gear. |
| 04-06-01-029K | 2024-12-04. Service bulletin. This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules. |
| PIT5076C | 2023-12-26. Service bulletin. Learning Issues When Repairing Service Stability/Traction Message. |
| PIC5643F | 2023-12-11. Service bulletin. Electronic Power Steering |
| PIC5643E | 2023-12-11. Service bulletin. Electronic Power Steering |
| PIC5643D | 2023-12-11. Service bulletin. Electronic Power Steering |
| PIC5320B | 2023-12-11. Service bulletin. Adding Radio Steering Wheel Control Switch. |
| 12261B | 2023-12-04. Service bulletin. Intermittent Airbag Warning Light Illuminated ? Replace Steering Wheel Airbag Coil |
| 12261A | 2023-12-04. Service bulletin. Intermittent Airbag Warning Light Illuminated ? Replace Steering Wheel Airbag Coil |