# Service bulletin PIT5188

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10112589
- Published by NHTSA: 2017\-08\-15
- Manufacturer's number: PIT5188
- Manufacturer's date: 2012\-11\-19
- NHTSA component: ELECTRICAL SYSTEM:SOFTWARE; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL

## NHTSA's summary

This Preliminary Information communication provides information to the technician about vehicles that may have a Program Cluster Message may be present when the ignition key is turned to the run position for approximately one second and then the cluster will operate in a normal fashion. Technician will need to update the Instrument Panel Cluster with the latest calibration in Service Programming System.

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2012/MC-10112589-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2012/MC-10112589-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Instrument cluster, Software

## Vehicles listed

- 2013 GMC ACADIA

## Other bulletins for the same vehicles and component

- [20\-NA\-132](/bulletins/10252774.md), 2024-04-05, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL; EQUIPMENT. This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
- [PIT4534D](/bulletins/10247657.md), 2023-12-26, Service bulletin: ELECTRICAL SYSTEM:WIRING:POSITION/LIMIT SENSOR/SWITCH; ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; UNKNOWN OR OTHER; AIR BAGS. Diagnostic Tip \- Driver Information Center \(DIC\) Switch Buttons Are Inoperative.
- [130089003](/bulletins/10246614.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Vehicle Software Enhancements
- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [PIP5632G](/bulletins/10230683.md), 2023-01-30, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
- [PIP4902Q](/bulletins/10230682.md), 2023-01-30, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. This Preliminary Information communication provides information to the technician that General Motors Technical Assistance Center may ask for Global Diagnostic System 2 Session Log. Technician will need use Global Diagnostic System 2 to send the session logs to General Motors Technical Assistance Center for further assistance on the vehicle in question.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.
- [070849020M](/bulletins/10190320.md), 2021-04-16, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
- [PIT4534G](/bulletins/10184104.md), 2020-12-14, Service bulletin: ELECTRICAL SYSTEM; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This Preliminary Information communication provides information to the technician about vehicle that have the Driver Information Center button inoperative. Technician will insure the connectors to the Instrument Panel Cluster and the DIC witch are connected and then remove the \(IPC/DSPLY\) fuse. Reinstall the fuse after a few seconds to return the function of the Driver Information Center switch to normal.
- [060089029T](/bulletins/10176647.md), 2020-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This informational bulletin includes information on Interior Cleaning \- Instrument Panel \(IP\), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer \- Product Availability.

JSON: [/v1/bulletins/10112589](/v1/bulletins/10112589)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIT5188&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10112589&vehicle=Service%20bulletin%20PIT5188)