Service bulletin PIP4663B
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10112554 |
| Published by NHTSA | 2017-08-15 |
| Manufacturer's number | PIP4663B |
| Manufacturer's date | 2012-11-07 |
| NHTSA component | ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; ENGINE AND ENGINE COOLING |
NHTSA's summary
This Preliminary Information communication provides information to the technician with the procedure for the modification when replacing the motor mounts. Technician will need to remove the original exhaust heat shield and drill a hole in it for the top locating pin. Technician will also cut off the lower locating pin.
The document
The document is the manufacturer's. This site does not hold it. NHTSA files a document at one of these two addresses; we have not asked NHTSA which.
Components
Engine, Exhaust and emissions
| CADILLAC CTS | 2004, 2005, 2006, 2007 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 04-06-04-051J | 2024-10-31. Service bulletin. This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive. |
|---|---|
| 09-06-04-026Y | 2024-09-05. Service bulletin. This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2. |
| 01-06-01-011P | 2024-09-05. Service bulletin. This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption. |
| 16-NA-383 | 2024-07-16. Service bulletin. This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up. |
| 15-00-89-004G | 2024-05-15. Service bulletin. This service bulletin provides technicians with information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. |
| 16-NA-383 | 2024-03-19. Service bulletin. This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up. |
| 22-NA-074 | 2024-02-29. Service bulletin. This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. |
| 16-NA-338 | 2024-02-17. Service bulletin. This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, vehicle service record retention and proper handling of assembly returns for Canadian Dealers only. |
| PI1394B | 2024-02-02. Service bulletin. This PI bulletin advises the technician on the proper way to install the pistons in an engine. |
| 130089009 | 2023-12-11. Service bulletin. Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules |