# Service bulletin 16\-NA\-022

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10112294
- Published by NHTSA: 2017\-08\-15
- Manufacturer's number: 16\-NA\-022
- Manufacturer's date: 2016\-01\-26
- NHTSA component: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT ADAPTIVE/MOBILITY

## NHTSA's summary

This technical bulletin provides a procedure to replace the instrument panel upper trim pad for conditions of a discoloration or shiny spot

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10112294-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10112294-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Electrical system, Equipment and accessories, Instrument cluster

## Vehicles listed

- 2016 CHEVROLET EXPRESS
- 2016 GMC SAVANA

## Other bulletins for the same vehicles and component

- [16NA022](/bulletins/10250077.md), 2024-02-12, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Panel Upper Trim Pad Discoloration and/or Shiny Spot
- [16NA022](/bulletins/10246564.md), 2023-12-11, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. Instrument Panel Upper Trim Pad Discoloration and/or Shiny Spot
- [07\-08\-49\-020R](/bulletins/10244214.md), 2023-10-18, Service bulletin: ELECTRICAL SYSTEM; EQUIPMENT; ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER. This informational bulletin provides information for the IPC odometer programming method quick reference guide.
- [07\-08\-49\-020J](/bulletins/10190504.md), 2021-04-20, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide Season Odometer Programming Methods in Use Today 1. IPC reprogramming and setup using the service programming system \(SPS\). 2. Odometer setup at the electronic service center \(ESC\) when using an exchange IPC/DIC. 3. Tech 2® – The Tech 2 is used to set up a replacement BCM, which includes loading the odometer value that is displayed and stored in the IPC. A replacement IPC will display the previously stored vehicle odometer value, communicated from the BCM, after cycling the ignition or driving the vehicle. \*The odometer programming is integrated as part of the BCM programming procedure. It is not a stand\-alone event.
- [070849020M](/bulletins/10190320.md), 2021-04-16, Service bulletin: ELECTRICAL SYSTEM:INSTRUMENT PANEL:SPEEDOMETER/ODOMETER:SENSOR/SENDING UNIT; EQUIPMENT:OTHER:OWNERS/SERVICE/OTHER MANUAL. IPC Odometer Programming Method Quick Reference Guide
- [060089029T](/bulletins/10176647.md), 2020-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This informational bulletin includes information on Interior Cleaning \- Instrument Panel \(IP\), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer \- Product Availability.
- [060089029S](/bulletins/10176646.md), 2020-06-22, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT. This informational bulletin includes information on Interior Cleaning \- Instrument Panel \(IP\), Hard or Plastic Surfaces, Seats, Carpet, Leather, Vinyl, Fabric Cleaner, Stain Remover, Restorer \- Product Availability.
- [PIT5058D](/bulletins/10137502.md), 2018-05-21, Service bulletin: SERVICE BRAKES, HYDRAULIC; ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about the operation and diagnostics of the Regular Production Option Code UJ1 brake warning pressure warning system. The technician can test the operation of the brake warning system. If the warning system does not function correctly, technician will need to inspect circuit 33 for a short to ground between X141 and the Instrument Panel Cluster terminal 14. Then inspect check circuit 33 for an open between X141 and the Instrument Panel Cluster terminal 14. Also technician should check male side of X141 circuit 33 with an ohm meter to ground and should be close to 0 ohms with engine off and key on. Start engine and circuit should go \(OL\) indicating that the flow switch opened. Then, turn the steering to the stop in pressure relief and verify that the circuit stays \(OL\) to check the operation of the pressure switch.
- [110849001W](/bulletins/10137386.md), 2018-05-21, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; EQUIPMENT; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. This technical bulletin provides information on Transport Mode On Message Displayed in Driver Information Center \(DIC\) and/or Battery Light is Flashing and the procedures to turn the transport mode message on and off.
- [PIC3100F](/bulletins/10125106.md), 2017-12-14, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL. This Preliminary Information communication provides information to the technician about vehicle\&\#39;s odometer appears to be inaccurate relative to a known distance traveled. Technician should obtain a hand\-held GPS unit to test the odometer. If a hand held GPS unit is not available, the only other option is to verify the miles traveled using a surveyor\&\#39;s wheel or a dynamometer.

JSON: [/v1/bulletins/10112294](/v1/bulletins/10112294)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2016-NA-022&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10112294&vehicle=Service%20bulletin%2016-NA-022)