# Service bulletin T\-TT\-0411\-16

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10111622
- Published by NHTSA: 2017\-08\-14
- Manufacturer's number: T\-TT\-0411\-16
- Manufacturer's date: 2016\-08\-18
- NHTSA component: ENGINE

## NHTSA's summary

TT: Customer complains about a Mil on condition with P219A DTC. This Tech Tip applies only to cases with: \*P219A and abnormal compression test results; \*Engine serial number is prior to F071611

## The document

- [NHTSA's copy of the document (PDF)](https://static.nhtsa.gov/odi/tsbs/2016/MC-10111622-9999.pdf)
- [If that address does not open, try this one](https://static.nhtsa.gov/odi/tsbs/2016/MC-10111622-0001.pdf)

The document is the manufacturer's. This site does not hold it.

## Components

Engine

## Trouble codes named

P219A

## Vehicles listed

- 2012 to 2016 TOYOTA YARIS

## Other bulletins for the same vehicles and component

- [T\-PANT\-2024\-004\-](/bulletins/10253223.md), 2024-04-15, Service bulletin: ENGINE AND ENGINE COOLING; ENGINE AND ENGINE COOLING:ENGINE:OIL/LUBRICATION. This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care \(TCMC\) website.
- [T\-TT\-0628\-20](/bulletins/10183281.md), 2020-11-30, Service bulletin: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. TT: HVAC drain tube is found to be blocked/clogged.
- [T\-TT\-0621\-20](/bulletins/10179791.md), 2020-09-14, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER; ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS. TT: Any HVAC repair requiring reassembly of the quick connect fitting between the suction hose sub\-assembly and the suction pipe sub\-assembly located at the top right of the engine compartment.
- [T\-TT\-0468\-17 Rev](/bulletins/10178524.md), 2020-08-17, Service bulletin: ENGINE AND ENGINE COOLING:COOLING SYSTEM. TT: HVAC drain tube is found to be blocked/clogged.
- [T\-SB\-0134\-16\-Rev](/bulletins/10164330.md), 2019-09-03, Service bulletin: POWER TRAIN; ELECTRICAL SYSTEM; ENGINE. TSB: REVISION NOTICE July 01, 2019 Rev2: ? Applicability has been updated to 2019 ? 2020 model year Toyota vehicles. ? The Techstream Preparation and Process Overview sections have been updated. October 30, 2017 Rev1: ? Applicability has been updated to include 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T\-SB\-0012\-13. Service Bulletin No. T\-SB\-0012\-13 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit \(ECU\) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field\-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System \(TIS\) and the Calibration Update Wizard \(CUW\). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Toyota term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ?ECU? is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module \(PCM\) ? Engine Control Module \(ECM\) ? Transmission Control Module \(TCM\) ? Any other Toyota specific control unit
- [T\-SB\-0134\-16](/bulletins/10149217.md), 2018-11-26, Service bulletin: ENGINE. TSB: Supersession Notice. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field\-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System \(TIS\) and the Calibration Update Wizard \(CUW\). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- [T\-SB\-0040\-16](/bulletins/10140589.md), 2018-06-11, Service bulletin: ENGINE; ELECTRICAL SYSTEM:SOFTWARE. TSB: This bulletin details the procedure for loading configuration data \(also known as as\-built data\) in the ECUs of the Yaris SD. When replacing one of the ECUs listed below, the configuration data must be loaded into the ECU. It is NOT recommended to swap ECU's between vehicles.
- [T\-SB\-0013\-16](/bulletins/10134271.md), 2018-04-23, Service bulletin: ENGINE; ELECTRICAL SYSTEM:SOFTWARE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\). TSB: The Yaris SD is equipped with Smart Start and Remote Keyless Entry. This bulletin details the Techstream key programming process. Please follow the key programming procedures outlined in this bulletin for the following: ? Smart ECU replacement ? Engine ECU \(PCM\) Replacement ? Key erase procedure ? Adding a Key ? All Keys are lost, how to turn the IG\-ON
- [T\-TT\-0362\-15](/bulletins/10134223.md), 2018-04-23, Service bulletin: ENGINE; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. TT: The vehicle may be difficult to start or have an abnormally low or rough idle after the battery has been disconnected or power to the Engine ECM has been interrupted.
- [TSB\-0012\-13 Rev2](/bulletins/10134128.md), 2018-04-23, Service bulletin: ENGINE; ELECTRICAL SYSTEM:SOFTWARE. TSB: Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field\-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System \(TIS\) and the Calibration Update Wizard \(CUW\). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.

JSON: [/v1/bulletins/10111622](/v1/bulletins/10111622)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20T-TT-0411-16&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10111622&vehicle=Service%20bulletin%20T-TT-0411-16)