# Service bulletin 16\-NA\-224

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10108587
- Published by NHTSA: 2017\-07\-18
- Manufacturer's number: 16\-NA\-224
- Manufacturer's date: 2017\-07\-17
- NHTSA component: BACK OVER PREVENTION: CAMERA SYSTEM; ELECTRICAL SYSTEM:WIRING

## NHTSA's summary

This informational bulletin provides information to inspect the wiring harness for pinched or backed out wires causing the back up camera not to work or lines across the screen.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Driver assistance, Electrical system, Backup camera, Wiring and fuses

## Vehicles listed

- 2016 CHEVROLET CRUZE

## Other bulletins for the same vehicles and component

- [PIC5611H](/bulletins/10231615.md), 2023-02-13, Service bulletin: BACK OVER PREVENTION. This Preliminary Information communication provides information to the technician about the rear view camera options on the vehicles equipped with rear view camera. The rear view camera brightness can be adjusted on some models while the transmission is in reverse and using the Menu or Select button. To turn off or on the guidelines in the rear view camera, use the radio display Config icon then Display, then the guidelines option.
- [070601016G](/bulletins/10213761.md), 2022-06-13, Service bulletin: BACK OVER PREVENTION. This informational bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
- [PIC5852C](/bulletins/10178316.md), 2020-08-10, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM:WIRING; EQUIPMENT ADAPTIVE/MOBILITY. This Preliminary Information communication provides information to the technician about vehicles that when attempting to start vehicle "No Fob Detected" message is displayed. Technician will find the Key FOB works and the vehicle will start with the key FOB is placed in the pocket. Technician will need to replace the Key FOB with the Key FOB with Passive Entry Passive Start.
- [100089005G](/bulletins/10159575.md), 2019-05-13, Service bulletin: ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
- [100089005H](/bulletins/10154629.md), 2019-03-18, Service bulletin: ELECTRICAL SYSTEM:WIRING. This warranty admin bulletin explains to the technician additional information may be needed when submitting transactions when doing wiring repairs.
- [17NA375](/bulletins/10139141.md), 2018-06-04, Service bulletin: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This informational bulletin provides a diagnostic tip for rear vision camera image that is grainy, distorted and/or pixelated
- [17\-NA\-175](/bulletins/10137670.md), 2018-05-21, Service bulletin: ELECTRICAL SYSTEM:WIRING. This technical bulletin provides a procedure to check the wiring harness to the crank sensor and validate and signs of rubbing or chaffing, repair wiring if found.
- [10\-00\-89\-005E](/bulletins/10137237.md), 2018-05-21, Service bulletin: ELECTRICAL SYSTEM:WIRING. This warranty administration bulletin adds the 2016 model year to a communication which provides dealership personnel revised wiring repair labor operations and required additional information.
- [PIE0384](/bulletins/10135300.md), 2018-05-07, Service bulletin: ELECTRICAL SYSTEM:WIRING. This engineering information bulletin is requesting information from the field on vehicles that have the concern of constant horn and/or any horn related concerns.
- [16NA316](/bulletins/10135266.md), 2018-05-07, Service bulletin: POWER TRAIN:AXLE ASSEMBLY:BANJO HOUSING; BACK OVER PREVENTION. This technical bulletin provides a procedure to drill two holes in the rear axle housings to spray lubricant into and then close up with rivets to correct a condition of a rear axle creak noise due to the improper lubrication of some of the internals.

JSON: [/v1/bulletins/10108587](/v1/bulletins/10108587)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2016-NA-224&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10108587&vehicle=Service%20bulletin%2016-NA-224)