# Service bulletin SSM70758

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10101070
- Published by NHTSA: 2017\-05\-30
- Manufacturer's number: SSM70758
- Manufacturer's date: 2014\-01\-06
- NHTSA component: ELECTRICAL SYSTEM:IGNITION:MODULE

## NHTSA's summary

"ISSUE: AFTER PROGRAMMING \(13MY ONLY\) KEYLESS VEHICLE MODULE \(KVM\) USING SDD DVD136 PATCH 2, IT WILL BE NOTICED THAT THE PASSIVE ENTRY SYSTEM OPERATES ONLY WHEN THE KEY IS HELD CLOSE TO THE DOOR HANDLE, TYPICALLY WITHIN A RANGE OF 10 CENTIMETRES. THIS IS A DEFAULT MODE AS A RESULT OF THE SOFTWARE DOWNLOAD. IN ADDITION THE SMART KEY RANGE WITHIN THE VEHICLE MAY ALSO BE REDUCED AND THE ‘SMART KEY NOT FOUND’ MESSAGE MAY APPEAR ON THE INSTRUMENT CLUSTER. IF THIS IS THE CASE, IT WILL BE NECESSARY TO FOLLOW THE KEYLESS START BACK UP STRATEGY WITH REFERENCE TO THE OWNER’S HANDBOOK"

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Ignition

## Vehicles listed

- 2013 LAND ROVER RANGE ROVER

## Other bulletins for the same vehicles and component

- [SSM72129](/bulletins/10103741.md), 2017-06-06, Service bulletin: ELECTRICAL SYSTEM:IGNITION:MODULE; ELECTRICAL SYSTEM:IGNITION. "WHEN PRESSING THE START/STOP SWITCH THE VEHICLE MAY NOT START AND NO IGNITION ACTIVITY IS SHOWN ON THE IPK. CAUSE A PRODUCTION ERROR WITHIN THE HARNESS SUPPLIER HAS LED TO VARIOUS SPLICE JOINTS HAVING EITHER NO CONTINUITY OR HIGH RESISTANCE READINGS"
- [SSM71519](/bulletins/10101321.md), 2017-05-31, Service bulletin: ELECTRICAL SYSTEM:12V/24V/48V BATTERY; ELECTRICAL SYSTEM:IGNITION. "ISSUE: THERE HAVE BEEN SOME REPORTS OF A FAILURE TO CONFIGURE TOUCH SCREEN \(TS\) KNOWN AS FRONT CONTROL DISPLAY INTERFACE MODULE \(FCDIM\) IN SDD AND IN THE SERVICE ACTION WHEN TRYING TO COMPLETE Q335. CAUSE: WE SUSPECT THE CONCERN IS CAUSED BY THE IGNITION TIMING OUT OR LOW BATTERY VOLTAGE DURING THE DATA TRANSFER FROM THE USB FLASH DRIVE TO THE VEHICLE."
- [SSM71519](/bulletins/10101302.md), 2017-05-31, Service bulletin: ELECTRICAL SYSTEM:IGNITION; ELECTRICAL SYSTEM:12V/24V/48V BATTERY. "ISSUE: THERE HAVE BEEN SOME REPORTS OF A FAILURE TO CONFIGURE FRONT CONTROL DISPLAY INTERFACE MODULE \(FCDIM\) WHEN TRYING TO COMPLETE Q335. CAUSE: WE SUSPECT THE CONCERN IS CAUSED BY THE IGNITION TIMING OUT OR LOW BATTERY VOLTAGE DURING THE DATA TRANSFER FROM THE USB FLASH DRIVE TO THE VEHICLE."
- [SGI14\-01](/bulletins/10055763.md), 2014-07-15, Service bulletin: ELECTRICAL SYSTEM:IGNITION. TRANSMISSION CONTROL SWITCH MAY FAIL WHEN PRESSING THE START/STOP IGNITION SWITCH.\*LJ

JSON: [/v1/bulletins/10101070](/v1/bulletins/10101070)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SSM70758&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10101070&vehicle=Service%20bulletin%20SSM70758)