# Service bulletin 01\-005\-14\-2903

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10098053
- Published by NHTSA: 2017\-04\-27
- Manufacturer's number: 01\-005\-14\-2903
- Manufacturer's date: 2014\-03\-12
- NHTSA component: VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

## NHTSA's summary

SOME CUSTOMERS MAY COMPLAIN ABOUT ONE OF THE FOLLOWING SYMPTOMS WHEN THE VEHICLE IS STOPPED AND THE TRANSMISSION IS IN D RANGE: • AN INTERMITTENT HIGH ENGINE IDLE SPEED. • AN INTERMITTENT ENGAGEMENT SHOCK. • AN INTERMITTENT FORWARD LURCH. THESE CONDITIONS MAY OCCUR WHEN THE CUSTOMER DEPRESSES THE BRAKE PEDAL AND MAKES CONTACT WITH THE THROTTLE PEDAL SIMULTANEOUSLY.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Throttle and cruise control

## Vehicles listed

- 2013 to 2015 MAZDA CX\-5
- 2012 to 2014 MAZDA MAZDA3
- 2014 to 2015 MAZDA MAZDA6

## Other bulletins for the same vehicles and component

- [0904615](/bulletins/10213440.md), 2022-06-06, Service bulletin: VEHICLE SPEED CONTROL. White door armrest\(s\) pink discoloration
- [09\-002\-21\-3770](/bulletins/10186703.md), 2021-02-05, Service bulletin: ELECTRICAL SYSTEM; VEHICLE SPEED CONTROL; EQUIPMENT. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer
- [09\-055\-16](/bulletins/10185833.md), 2021-01-25, Service bulletin: VEHICLE SPEED CONTROL; BACK OVER PREVENTION. Rattle noise from front door glass
- [09\-038\-16](/bulletins/10185829.md), 2021-01-25, Service bulletin: BACK OVER PREVENTION; VEHICLE SPEED CONTROL. Some vehicles may experience a rattle noise from the front door glass when driving with the window open approx 1/2 to 4 inches \(1\-10 cm\)
- [09\-034\-18\-3430a](/bulletins/10148072.md), 2018-11-13, Service bulletin: EQUIPMENT; VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\- warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [09\-034\-18\-3430](/bulletins/10144333.md), 2018-09-10, Service bulletin: VEHICLE SPEED CONTROL. In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper\-proof speedometers. When a speedometer is replaced, the new speedometer will read zero \(0\) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster \(IPC\) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after\-warranty assistance \(AWA\) or DSA that can be utilized to cover this service expense.
- [05\-006\-15\-3107](/bulletins/10105528.md), 2017-06-07, Service bulletin: EQUIPMENT; VEHICLE SPEED CONTROL. SOME VEHICLES MAY EXHIBIT THE ATX FAIL\-SAFE FUNCTION WORKING WITH THE FOLLOWING SYMPTOMS: • THE VEHICLE SPEED DOES NOT INCREASE WITH ENGINE SPEED • THE ATX DOES NOT SHIFT UP OR DOWN AS EXPECTED THE CONDITION MAY NOT ALWAYS BE ABLE TO BE REPRODUCED AND DTCS MAY NOT BE STORED WHEN THE VEHICLE IS BROUGHT IN. FOREIGN MATERIAL \(IRON PARTICLES IN THE ATF\) MAY ENTER THE ATX VALVE BODY AND CAUSE A TEMPORARY MALFUNCTION OF THE VALVE BODY AND/OR SENSOR \(ATX FAIL\-SAFE FUNCTION ACTIVATED\). THE FAIL\-SAFE FUNCTION IS CANCELED WITHOUT DTCS RECORDED IF THE MALFUNCTION GOES AWAY AND DOES NOT OCCUR AGAIN AT THE NEXT DRIVE CYCLE.
- [01\-014\-13](/bulletins/10059438.md), 2016-03-16, Service bulletin: VEHICLE SPEED CONTROL:CRUISE CONTROL. SUMMARY TO BE PROVIDED ON A FUTURE DATE.

JSON: [/v1/bulletins/10098053](/v1/bulletins/10098053)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2001-005-14-2903&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10098053&vehicle=Service%20bulletin%2001-005-14-2903)