# Service bulletin 09\-016\-13\-2761

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10097386
- Published by NHTSA: 2017\-04\-14
- Manufacturer's number: 09\-016\-13\-2761
- Manufacturer's date: 2013\-05\-07
- NHTSA component: BACK OVER PREVENTION: CAMERA SYSTEM

## NHTSA's summary

SOME VEHICLES MAY EXHIBIT AN INOPERATIVE REAR MOUNT CAMERA. THIS CONCERN MAY BE CAUSED BY WATER ENTERING INSIDE THE CAMERA DURING A HIGH\-PRESSURE CAR WASH.THE SHAPE OF THE CAMERA HAS BEEN CHANGED TO ELIMINATE THIS CONCERN.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2013 MAZDA CX\-5

## Other bulletins for the same vehicles and component

- [0904315](/bulletins/10213436.md), 2022-06-06, Service bulletin: BACK OVER PREVENTION. Rattle/Pop noise from instkrument panel and/or creak noise from apillar over rough/bumpy roads
- [0500515](/bulletins/10213407.md), 2022-06-06, Service bulletin: BACK OVER PREVENTION. WHINING NOISE FROM AUTOMATIC TRANSAXLE.
- [02\-015\-16](/bulletins/10185825.md), 2021-01-25, Service bulletin: POWER TRAIN; BACK OVER PREVENTION; STRUCTURE; SUSPENSION. Knocking noise from the rear of the vehicle. Some vehicles may exhibit a knocking noise from the rear of the vehicle. Upon inspection, cracks may be found in rear differential mount bushing, causing the noise. The is caused by insufficient durability of the bushing. To eliminate the noise, the shape of the bushing has been changed.
- [02\-010\-16](/bulletins/10185824.md), 2021-01-25, Service bulletin: BACK OVER PREVENTION. Knocking/squeaking noise from front shock absorber, creaking noise from front lower arm bushing.
- [SA386](/bulletins/10185814.md), 2021-01-25, Service bulletin: AIR BAGS; BACK OVER PREVENTION. Check engine light \(with DTCs P0101, P061B, P2122, P2138\) may illuminate after PCM reprogramming due to a mislogic detection in the PCM calibration, available in the current IDs version 103.03. Please uninstall IDS and install version 103.00 to prevent this situation and "do not update ids until further notice"
- [02\-003\-17](/bulletins/10185799.md), 2021-01-25, Service bulletin: BACK OVER PREVENTION. Knocking/Squeaking noise from front shock absorber, creaking noise fkrom front lower arm bushing
- [09\-016\-14\-2885](/bulletins/10098013.md), 2017-04-27, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. SOME VEHICLES MAY EXHIBIT AN INOPERATIVE REAR MOUNT CAMERA. THIS CONCERN MAY BE CAUSED BY WATER ENTERING INSIDE THE CAMERA DURING A HIGH\-PRESSURE CAR WASH.THE SHAPE OF THE CAMERA HAS BEEN CHANGED TO ELIMINATE THIS CONCERN.
- [09\-016/14](/bulletins/10055503.md), 2014-06-04, Service bulletin: BACK OVER PREVENTION: CAMERA SYSTEM. SOME VEHICLES MAY HAVE INOPERATIVE REAR MOUNT CAMERA. DUE TO WATERING ENTERING THE CAMERA FROM A HIGH PRESSURE CAR WASH. 06/04/14\*LJ

JSON: [/v1/bulletins/10097386](/v1/bulletins/10097386)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2009-016-13-2761&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10097386&vehicle=Service%20bulletin%2009-016-13-2761)