Service bulletin SSM 46387
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10095805 |
| Published by NHTSA | 2017-03-20 |
| Manufacturer's number | SSM 46387 |
| Manufacturer's date | 2017-02-15 |
| NHTSA component | ELECTRICAL SYSTEM:SOFTWARE |
NHTSA's summary
SOME 2017 F-SUPER DUTY VEHICLES EQUIPPED WITH BLIS THAT HAVE HAD THE PICKUP BOX REMOVED FOR UPFITTER MODIFICATION MAY EXHIBIT A BLIS WARNING MESSAGE IN THE MESSAGE CENTER. TO CORRECT THIS CONCERN, USE INTEGRATED DIAGNOSTIC SYSTEM (IDS) SERVICE TOOL VERSION 104.01 OR LATER TO CONFIGURE THE BLIS SYSTEM. THESE SETTINGS CAN BE FOUND UNDER TOOLBOX > MODULE PROGRAMMING > PROGRAMMABLE PARAMETERS > WARNING LAMPS AND CHIMES AND MUST BE ADJUSTED IN MULTIPLE MODULES. DETAILS CAN BE FOUND ON THE TRUCK BODY BUILDER ADVISORY SERVICE (BBAS) WEBSITE, FOUND BY CLICKING THE LINK AT THE BOTTOM OF THE WEBPAGE AT HTTPS://WWW.FLEET.FORD.COM. ONCE AT BBAS WEBSITE, CLICK ON BULLETINS, AND REFER TO PUBLISHED QUALIFIED VEHICLE MODIFIER (QVM) BULLETIN FOR BLIS WARNING PROGRAMMING. CHANGES TO BLIS SETUP AS A RESULT OF UPFITTER MODIFICATIONS ARE NON-WARRANTABLE.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Electrical system, Software
| FORD F-250 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
|---|---|
| FORD F-350 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| FORD F-450 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| FORD F-550 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| FORD F-650 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
| FORD F-750 SD | 2017 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| SSM 50375 | 2021-12-27. Service bulletin. Some 2016-2021 Ford and Lincoln vehicles equipped with SYNC 3 may exhibit a condition where the navigation voice prompts are inoperative after a SYNC map update. This may be due to an incomplete installation of the SYNC map software. If possible, using the original USB that installed the update, reperform the update and verify the navigation voice prompts have returned. Multiple reboots are expected when this update is being performed. Verify the Installation Is Complete message displays in the touch screen. If the original USB is not available, go to website https://syncnavigation.com/ford/home or https://syncnavigation.com/lincoln/home to download the files once more for the affected vehicle. For further map update support, reference the FAQ section on these websites. |
|---|---|
| TSB 20-2255 | 2020-09-02. Service bulletin. Some 2016 MKS, 2016-2017 Navigator, 2016-2018 F150/Focus/CMAX/Edge/Fiesta/MKX/ Transit Connect/Mustang, 2017-2018 Continental/Fusion/MKZ, 2017-2019 Explorer, 2016-2019 Escape/MKC/Flex/MKT/Taurus/Transit/Expedition/F-Super Duty, and 2018-2019 EcoSport vehicles equipped with SYNC 3 may experience various SYNC performance related concerns. To correct the condition, follow the Service Procedure. |
| SSM 46258 | 2017-03-10. Service bulletin. 2017 F-SUPER DUTY TRUCKS HAVE THE ABILITY TO ADJUST THE TIRE SIZE AND AXLE RATIO USING INTEGRATED DIAGNOSTIC SOFTWARE (IDS) VERSION 103.03 OR LATER. ONLY TIRE SIZE AND AXLE RATIO OPTIONS THAT ARE AVAILABLE FROM THE FACTORY CAN BE SELECTED AND MUST BE ADJUSTED TO MATCH IN MULTIPLE MODULES. FOR THE PROPER PROCEDURE, REFER TO THE FORD FLEET WEBSITE AT HTTPS://WWW.FLEET.FORD.COM/ AND CLICK THE LINK TO THE TRUCK BODY BUILDER ADVISORY SERVICE (BBAS) AT THE BOTTOM OF THE WEBPAGE. ONCE AT BBAS WEBSITE, CLICK ON BULLETINS, AND REFER TO PUBLISHED QUALIFIED VEHICLE MODIFIER (QVM) BULLETIN Q-262. CHANGES TO TIRE SIZE OR AXLE RATIO AS A RESULT OF CUSTOMER OR UPFITTER MODIFICATIONS ARE NON-WARRANTABLE. |