Service bulletin 12-187-15
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10092005 |
| Published by NHTSA | 2017-02-16 |
| Manufacturer's number | 12-187-15 |
| Manufacturer's date | 2015-07-27 |
| NHTSA component | STRUCTURE:BODY:TRUNK LID |
NHTSA's summary
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO ENHANCE THE OPERATION OF THE TRUNK LATCH MECHANISM AND PREVENT IT FROM RELEASING IMMEDIATELY AFTER CLOSING.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Body and frame
| SUBARU WRX | 2015 |
|---|---|
| SUBARU WRX STI | 2015 (the catalog's model; the bulletin names a series or trim of it) |
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| 13-108-25 | 2025-09-02. Service bulletin. This bulletin provides information on paint codes for vehicles in the 2026 line up. |
|---|---|
| 095914 | 2023-05-08. Service bulletin. Rust Treatment Procedure for Heat Shield Retaining Bolt Heads |
| TechTIPS | 2023-05-08. Service bulletin. Subaru Service and Technical Support Line Newsletter |
| 1217214R | 2023-03-06. Service bulletin. Paint Chipping Due To Trunk Lid Movement |
| 12-305-20 | 2021-01-05. Service bulletin. This bulletin announces a design change made to the front hood air intake duct. |
| 12-301-20 | 2020-11-05. Service bulletin. This bulletin outlines changes made to the rear shelf trim to address customer concerns of a rattling sound heard while driving over bumpy / rough roads. |
| 12-284-20 | 2020-04-03. Service bulletin. This bulletin announces availability of new interior door handles which will address isolated concerns of the chrome finish peeling. |
| 12-271-19 | 2019-09-05. Service bulletin. This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. This change will prevent them from contacting each other and possibly damaging their painted surfaces. |
| 02-182-19 | 2019-07-01. Service bulletin. This Service Information bulletin announces a design change made to the TGV assemblies used on the Forester Turbo models and WRXs listed above. Condensation resulting from EGR system operation may enter the area between the TGV shaft and bearing. Over time, corrosion can develop and impede movement of the TGV shaft and cause any of the DTCs P2004, 2005, 2006 and /or P2007 to set. The material of the TGV shaft has been changed to stainless steel to optimize corrosion resistance. |
| 12-251-18 | 2018-12-10. Service bulletin. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop. |