# Service bulletin 07\-94\-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10092002
- Published by NHTSA: 2017\-02\-16
- Manufacturer's number: 07\-94\-15
- Manufacturer's date: 2015\-07\-23
- NHTSA component: STRUCTURE:BODY

## NHTSA's summary

THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS CONCERNS OF CONTACT BETWEEN THE TOP HORIZONTAL EDGE OF THE SIDE MARKER LAMP AND THE CORRESPONDING FENDER EDGE AS SHOWN IN THE PHOTO TO THE RIGHT.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Body and frame

## Vehicles listed

- 2013 SUBARU BRZ

## Other bulletins for the same vehicles and component

- [13\-108\-25](/bulletins/11022304.md), 2025-09-02, Service bulletin: STRUCTURE:BODY. This bulletin provides information on paint codes for vehicles in the 2026 line up.
- [1214012R](/bulletins/10235917.md), 2023-05-08, Service bulletin: STRUCTURE:BODY:TRUNK LID; STRUCTURE. ?Clack? or ?Popping? Sound from Trunk
- [1214012](/bulletins/10234275.md), 2023-04-17, Service bulletin: STRUCTURE:BODY:TRUNK LID. ?Clack? or ?Popping? Sound from Trunk
- [12\-309\-21](/bulletins/10188198.md), 2021-03-04, Service bulletin: EQUIPMENT; STRUCTURE. This bulletin announces a design change made to the replacement front console box cover.
- [12\-271\-19](/bulletins/10164447.md), 2019-09-05, Service bulletin: STRUCTURE. This Service Information Bulletin announces a design change made to the rear bumper cover side mounting brackets. These new brackets provide increased clearance between the edges of the bumper cover and the corresponding quarter panels. This change will prevent them from contacting each other and possibly damaging their painted surfaces.
- [12\-267\-19](/bulletins/10163006.md), 2019-07-22, Service bulletin: STRUCTURE. This bulletin announces availability of a new retaining plate and installation method to address gapping conditions which may develop between the front bumper cover and fender.
- [12\-251\-18](/bulletins/10150932.md), 2018-12-10, Service bulletin: LATCHES/LOCKS/LINKAGES; STRUCTURE:BODY. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.
- [12\-251\-18](/bulletins/10150887.md), 2018-12-10, Service bulletin: ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL; STRUCTURE:BODY; STRUCTURE:FRAME AND MEMBERS. This bulletin provides a service procedure to address a gap between the top edge of the door and the instrument panel on the models listed as shown in the photo below. The gap may also make the glove box door difficult to close fully.There is a latch to keep the glove box closed on both sides of the glove box door. If the door is closed without using enough force to engage both latches or by pushing it shut on just one side instead of in the middle, one may close and not the other. Over time, if the door is not fully closed with both latches, high cabin temperatures along with weight of the items inside the glove box may cause the assembly to deform slightly and a gap to develop.
- [12\-250\-18](/bulletins/10145074.md), 2018-10-01, Service bulletin: STRUCTURE:BODY:BUMPERS. This bulletin announces a design change made to the rear bumper cover \(face\). To insure a proper fit of the new cover, the rear edge portion of the existing inner mud guards \(splash shields\) will need to be modified slightly in specific areas. In addition, plastic arch caps \(plugs\) are inserted into unused holes in the rear wheel arch lip of the new cover to fill unused mounting holes for optional accessory mud guards when not installed.
- [12\-231\-18R](/bulletins/10140485.md), 2018-06-11, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; STRUCTURE. This bulletin announces a design change to the air vent grille located in the lower portion of the trunk \(or cargo\) area. The shutters of the vent grille are designed to open briefly and relieve cabin pressure when the doors are shut with the windows fully closed. The vent grilles have rubber ?shutters? which occasionally, may catch on the frame \(case\) portion and not close properly allowing outside air / odor to enter the cabin.

JSON: [/v1/bulletins/10092002](/v1/bulletins/10092002)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2007-94-15&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10092002&vehicle=Service%20bulletin%2007-94-15)