Service bulletin TSB-16-52B-004
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10091389 |
| Published by NHTSA | 2017-02-13 |
| Manufacturer's number | TSB-16-52B-004 |
| Manufacturer's date | 2016-06-17 |
| NHTSA component | SEATS; SEAT BELTS |
NHTSA's summary
THIS IS A TECHNICAL SERVICE BULLETIN PROVIDED TO DEALERS, WHICH PROVIDES UPDATES TO THE CIRCUIT DIAGRAMS SECTION OF THE AFFECTED SERVICE MANUALS TO INCLUDE THE SEAT SLIDE SENSOR AND FRONT SEAT BELT SWITCH.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Seat belts, Seats
| MITSUBISHI MIRAGE | 2014, 2015 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TT217 | 2020-01-24. Service bulletin. This is a service newsletter (Tech Talk) that was sent out to dealers. |
|---|---|
| TSB-19-52B-004 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin sent to dealers. This bulletin updates the Supplemental Restraint System (SRS) section of the affected Service Manual, to correct the Check Chart to the Diagnostic Trouble Codes (DTCs) list. |
| TSB-19-52B-003 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin sent to dealers. The bulletin updates the Supplemental Restraint System (SRS) section of the affected Service Manuals, to correct the description of DTC B1616 in the Check Chart for Diagnostic Trouble Codes. |
| TSB-19-52B-001 | 2019-03-18. Service bulletin. This is a Technical Service Bulletin that was sent to dealers. The bulletin updates the Interior and Supplemental Restraint (SRS) section of the affected Service Manuals to update the Removal and Installation procedure of seat belts with pre-tensioner (seat belt anchor adjuster has been added). |
| TSB-16-52A-001 | 2017-06-05. Service bulletin. THIS IS A TECHNICAL SERVICE BULLETIN SENT TO DEALERS TO INSTRUCT THEM ON HOW TO ADJUST AND SYNCHRONIZE THE FRONT SEAT SLIDE RAIL LOCK POSITION TIMING ON VEHICLES WHERE THE CUSTOMER REPORTS A CONDITION WHERE, AFTER ADJUSTING THE SEAT SLIDE POSITION (FORWARD OR REARWARD), ONE OF THE SEAT RAILS DOES NOT LOCK INTO POSITION WHEN THE ADJUSTER BAR IS RELEASED. |
| TSB-16-52A-003 | 2017-02-13. Service bulletin. THIS TECHNICAL SERVICE BULLETIN, PROVIDED TO DEALERS, UPDATES THE INTERIOR SECTION OF THE AFFECTED SERVICE MANUALS TO INCLUDE THE SEAT SLIDE SENSOR AND UPDATED INFORMATION FOR THE SEAT BELT SWITCH CONTINUITY CHECK. |
| TSB-16-52A-001 | 2016-07-07. Service bulletin. A customer may report a condition where, after adjusting the seat slide position (forward or rearward), one of the seat rails does not lock into position when the adjuster bar is released. An unlocked inner or outer seat rail allows for excessive motion in the seat cushion, usually noticed when the occupant redistributes their body weight while sitting in the seat. This condition may be due to unsynchronized lock position timing between the inner and outer rail. |