# Service bulletin 5NP\-W7J6Y\-11

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10089604
- Published by NHTSA: 2017\-01\-26
- Manufacturer's number: 5NP\-W7J6Y\-11
- Manufacturer's date: 2016\-10\-18
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

"AUTOMATIC TRANSMISSION SOLENOID \& SENSOR REPLACEMENT FOR DTC P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P2709 \& P0841"

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Transmission and driveline, Automatic transmission

## Trouble codes named

P0741, P0743, P0748, P0753, P0758, P075A, P0763, P0768, P0773, P0841, P2709

## Vehicles listed

- 2017 GENESIS G80
- 2012 to 2016 HYUNDAI EQUUS
- 2012 to 2013 HYUNDAI GENESIS
- 2015 to 2016 HYUNDAI GENESIS
- 2013 to 2016 HYUNDAI GENESIS COUPE

## Recalls for the same vehicles and component

- [15V097000](/recalls/nhtsa/15V097000.md), 2015-02-19: EXTERIOR LIGHTING:TAIL LIGHTS; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION \(PRNDL\)

## Other bulletins for the same vehicles and component

- [21\-AT\-010HG](/bulletins/10253037.md), 2024-04-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This TSB provides a procedure to replace the solenoids listed below for slipping, shift flare and/or harsh shift during the 2\~3, 3\~4 or 4\~5 upshift.
- [19\-AT\-023HG](/bulletins/10253027.md), 2024-04-11, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. If you are servicing a vehicle with a transmission slipping concern, follow the Service Procedure shown below and perform a stall test. This TSB provides a procedure to test each clutch in the transmission. If the vehicle fails the stall test, replace the transmission. PASS: Stall speed is between 1700\~2900 rpm \(See shop manual for stall speed\). FAIL: Engine revs to redline limit \(6,000\~6,500 rpm\). If so, replace the transmission.
- [19\-AT\-011HG](/bulletins/10161686.md), 2019-07-01, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. The procedure describes the procedure to check the ATF level for 8\-speed Rear\-Wheel\-Drive vehicles.
- [19\-AT\-011H](/bulletins/10161685.md), 2019-07-01, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. The procedure describes the procedure to check the ATF level for 8\-speed Rear\-Wheel\-Drive vehicles.
- [19\-AT\-008H](/bulletins/10160100.md), 2019-05-20, Service bulletin: ENGINE; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the related solenoid and E\-module.
- [19\-FL\-003HG](/bulletins/10160099.md), 2019-05-20, Service bulletin: ELECTRICAL SYSTEM; POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides the procedure to write the Vehicle Identification Number \(VIN\) during the replacement of the Engine Control Module \(ECM\) or Powertrain Control Module \(PCM\). Once the VIN has been programmed to the ECM/PCM, it cannot be removed or overwritten.
- [19\-AT\-007H](/bulletins/10160097.md), 2019-05-20, Service bulletin: POWER TRAIN; EQUIPMENT; POWER TRAIN:AUTOMATIC TRANSMISSION. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCU learning time and improve the shift quality.
- [19\-AT\-007HG](/bulletins/10160096.md), 2019-05-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This bulletin provides a procedure to transfer oil pressure data to the TCU using GDS Mobile. This procedure is necessary to reduce the TCM learning time and improve the shift quality.
- [19\-AT\-001HG](/bulletins/10154684.md), 2019-03-18, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. When servicing a vehicle with a ?Check Engine light? and any of the DTCs listed below, follow the Service Procedure and replace the E\-module.
- [5NP\-H3D9Z\-03](/bulletins/10110919.md), 2017-08-10, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION:COOLING UNIT AND LINES. The following vehicles are equipped with an 8\-speed automatic transmission. The ATF level can be checked by the procedure shown below.

JSON: [/v1/bulletins/10089604](/v1/bulletins/10089604)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%205NP-W7J6Y-11&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10089604&vehicle=Service%20bulletin%205NP-W7J6Y-11)