# Service bulletin TJ29131

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10088665
- Published by NHTSA: 2017\-01\-13
- Manufacturer's number: TJ29131
- Manufacturer's date: 2016\-10\-21
- NHTSA component: ENGINE; POWER TRAIN

## NHTSA's summary

THIS IS A TECHNICAL JOURNAL: CUSTOMER MAY EXPERIENCE A LOW OIL LEVEL WARNING IN DIM AND /OR OIL LEAKAGE FROM THE ENGINE. THE OIL MAY LEAK DUE TO A CRACK IN THE PLUG FROM THE VVT PULLEY REPLACE BOTH PLUGS IN BOTH VVT\-PULLEYS ACCORDING TO THE ATTACHED INSTRUCTION. PLUG PN:31375877 IF THE TIMING BELT IS EFFECTED WITH OIL , REPLACE THE TIMING BELT ACCORDING TO VIDA INSTRUCTIONS.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine, Transmission and driveline

## Vehicles listed

- 2015 to 2016 VOLVO S60
- 2015 to 2016 VOLVO S60CC
- 2015 to 2016 VOLVO S60I
- 2015 to 2016 VOLVO S80
- 2016 VOLVO S90
- 2015 to 2016 VOLVO V60
- 2015 to 2016 VOLVO V60CC
- 2015 to 2016 VOLVO V70
- 2015 to 2016 VOLVO XC60
- 2015 to 2016 VOLVO XC70
- 2015 VOLVO XC90
- 2016 VOLVO XC90
- 2016 VOLVO XC90H

## Recalls for the same vehicles and component

- [2019188](/recalls/tc/2019188.md), 2019-04-18: Engine
- [19V308000](/recalls/nhtsa/19V308000.md), 2019-04-17: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS

## Other bulletins for the same vehicles and component

- [36496.10.0](/bulletins/11033734.md), 2026-06-08, Service bulletin: POWER TRAIN. This is a Technical Journal: Intermittent knocking noise during acceleration. If the sound corresponds to attached sound file, change front drive shafts to the below part numbers.
- [35526.1.8](/bulletins/11032678.md), 2026-05-14, Service bulletin: ENGINE. This is a Technical Journal: Text plus 2 PDFs and 1 .PNG Oil Consumption test. Perform the test. Follow service procedure\&\#13; Description and Service sections updated to clarify that vehicle reports are not required.\&\#13;
- [36814](/bulletins/11020543.md), 2025-07-09, Service bulletin: POWER TRAIN. This is a Technical Journal: Transmission Shifts From D or R to P Immediately After Starting. This symptom can occur if the driver changes the position of the gear shifter from P to D or R very quickly after starting the engine and the starting process is not completed. Inform the driver to pause briefly after starting the vehicle before shifting into D or R.
- [36814](/bulletins/11020524.md), 2025-07-09, Service bulletin: POWER TRAIN. This is a Technical Journal: Transmission Shifts From D or R to P Immediately After Starting. This symptom can occur if the driver changes the position of the gear shifter from P to D or R very quickly after starting the engine and the starting process is not completed. Inform the driver to pause briefly after starting the vehicle before shifting into D or R.
- [36814](/bulletins/11014118.md), 2025-02-11, Service bulletin: POWER TRAIN. This is a Technical Journal: Transmission Shifts From D or R to P Immediately After Starting. This symptom can occur if the driver changes the position of the gear shifter from P to D or R very quickly after starting the engine and the starting process is not completed. Inform the driver to pause briefly after starting the vehicle before shifting into D or R.
- [36665](/bulletins/11011743.md), 2024-12-10, Service bulletin: POWER TRAIN. This is a Technical Journal: ERAD \(Electric Rear Axle Drive\) Bearing Noise. Bearing kit replacement.
- [36814](/bulletins/11009813.md), 2024-11-05, Service bulletin: POWER TRAIN. This is a Technical Journal: Transmission Shifts From D or R to P Immediately After Starting. This symptom can occur if the driver changes the position of the gear shifter from P to D or R very quickly after starting the engine and the starting process is not completed. Inform the driver to pause briefly after starting the vehicle before shifting into D or R.
- [TJ36858.1.1\-2024\-06\-06](/bulletins/11006558.md), 2024-08-21, Service bulletin: ENGINE. This is a Technical Journal: High Temperature Message in DIM after Coolant Pump Replacement. Replace coolant pump
- [34123.1.7](/bulletins/10254402.md), 2024-05-08, Service bulletin: ENGINE AND ENGINE COOLING. This is a Technical Journal: T8 P0EA773 Auxiliary Cooling System Performance. install component 32139082
- [36858.1.0](/bulletins/10253002.md), 2024-04-10, Service bulletin: ENGINE AND ENGINE COOLING. This is a Technical Journal: High Temperature Message in DIM after Coolant Pump Replacement. Replace coolant pump

JSON: [/v1/bulletins/10088665](/v1/bulletins/10088665)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20TJ29131&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10088665&vehicle=Service%20bulletin%20TJ29131)