# Service bulletin 11\-132\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10084414
- Published by NHTSA: 2016\-11\-18
- Manufacturer's number: 11\-132\-13
- Manufacturer's date: 2013\-07\-03
- NHTSA component: ELECTRICAL SYSTEM:SOFTWARE; ENGINE

## NHTSA's summary

THIS BULLETIN ANNOUNCES THE AVAILABILITY OF ECM REPROGRAMMING FILES TO ADDRESS AN IMPROPER JUDGMENT OF INTAKE MANIFOLD PRESSURE WHEN THE ENGINE IS COLD WHICH COULD CAUSE DTC P0244 TO SET. THESE FILES ARE INCLUDED IN THE JULY, 2013 SSMIII SOFTWARE UPDATE, VERSION 1.38.52.7.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Electrical system, Engine, Software

## Trouble codes named

P0244

## Vehicles listed

- 2014 SUBARU FORESTER

## Other bulletins for the same vehicles and component

- [078314](/bulletins/10233431.md), 2023-04-03, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. Diagnostics for DTC B1500 and U1500
- [TSG\-1](/bulletins/10141532.md), 2018-06-18, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT. Tech Support SD Card for Navi Complete
- [15\-193\-16R](/bulletins/10120999.md), 2017-10-27, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\). All 2012 to 2015 Models Equipped with Fujitsu Ten \(F10\) Generation 1 \(Gen1\) Audio / Navigation Systems. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software\-related updates and operating enhancements.
- [15\-193\-16](/bulletins/10120965.md), 2017-10-27, Service bulletin: EQUIPMENT:ELECTRICAL:NAVIGATIONAL SYSTEM\(GLOBAL POSITIONING SYSTEM\); ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces a new procedure for updating the operating software used in F10 Gen1 audio / navigation systems. This new procedure eliminates the need to exchange the head unit / SD card to obtain software\-related updates and operating enhancements. All 2012 to 2015 Models Equipped with FujitsuTen \(F10\) Generation 1 \(Gen1\) Audio / Navigation Systems
- [11\-164\-16R](/bulletins/10111097.md), 2017-08-14, Service bulletin: ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE \(TCM/PCM/TECM\); ELECTRICAL SYSTEM:SOFTWARE. This bulletin announces the availability of reprogramming files to optimize the ECM. These files will address customer concerns of a slight surging / decrease in engine power condition between approx. 2000\-2500 RPM on light acceleration during high ambient temperatures \(intake air temperatures exceeding 104 deg. F\).
- [11\-148\-14R](/bulletins/10094111.md), 2017-03-07, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE; ENGINE. REPROGRAMMING FILE AVAILABILITY FOR OIL LEVEL DETECTION
- [11\-146\-14](/bulletins/10092872.md), 2017-02-24, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. REPROGRAMMING FILES FOR DTC P0420
- [11\-153\-15R](/bulletins/10090405.md), 2017-02-03, Service bulletin: ENGINE; ELECTRICAL SYSTEM:SOFTWARE. THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO ADDRESS CUSTOMER CONCERNS OF EXTENDED CRANKING TIME BEFORE THE ENGINE STARTS.
- [06\-48\-15](/bulletins/10088062.md), 2017-01-10, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE STOP LIGHT SWITCH TO REDUCE THE POSSIBILITY OF IMPROPER ILLUMINATION OF THE ABS AND/OR VDC WARNING LAMP WITH RESULTING DTCS C1531 AND/OR C0054. DETAILS OF THE SWITCH CHANGES ARE SHOWN IN THE ILLUSTRATION BELOW.
- [15\-186\-15R](/bulletins/10084150.md), 2016-11-08, Service bulletin: ELECTRICAL SYSTEM:SOFTWARE. "THIS BULLETIN ANNOUNCES REPROGRAMMING FILE AVAILABILITY AND A CORRESPONDING INSTALLATION PROCEDURE WHICH WILL ALLOW BLUETOOTH PAIRING TO BE COMPLETED SUCCESSFULLY WHEN USING VOICE COMMANDS ON THE CLARION AUDIO UNITS LISTED BELOW. PAIRING OF PHONES USING VOICE RECOGNITION IS THE PREFERRED METHOD ON THESE CLARION AUDIO UNITS. SEE BULLETIN 15\-185\-15 FOR ADDITIONAL DETAILS ON USING VOICE RECOGNITION TO PAIR PHONES TO CLARION AUDIO UNITS. THE PROCEDURE WILL INVOLVE DOWNLOADING THE APPLICABLE UPDATE FILE FROM SUBARUNET THEN LOADING IT ONTO A FLASH DRIVE FOR INSTALLATION."

JSON: [/v1/bulletins/10084414](/v1/bulletins/10084414)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2011-132-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10084414&vehicle=Service%20bulletin%2011-132-13)