WenmarOpen by Wenmar Pro

Service bulletin 122-S5V2E-09

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10081321
Published by NHTSA2016-10-03
Manufacturer's number122-S5V2E-09
Manufacturer's date2016-08-03
NHTSA componentPOWER TRAIN:AXLE ASSEMBLY

NHTSA's summary

"THIS CAMPAIGN INCLUDES STEPS WHERE CONTROL UNIT(S) IN THE VEHICLE WILL BE PROGRAMMED WITH THE PIWIS TESTER. THE VEHICLE VOLTAGE MUST BE MAINTAINED BETWEEN 13.5 VOLTS AND 14.5 VOLTS DURING THIS PROGRAMMING. FAILURE TO MAINTAIN THIS VOLTAGE COULD RESULT IN DAMAGED CONTROL UNIT(S). DAMAGE CAUSED BY INADEQUATE VOLTAGE DURING PROGRAMMING IS NOT A WARRANTABLE DEFECT. THE TECHNICIAN MUST VERIFY THE ACTUAL VEHICLE VOLTAGE IN THE PIWIS TESTER BEFORE STARTING THE CAMPAIGN AND ALSO DOCUMENT THE ACTUAL VOLTAGE ON THE REPAIR ORDER. PLEASE REFER TO EQUIPMENT INFORMATION EQ1401 FOR A LIST OF SUITABLE BATTERY CHARGERS/POWER SUPPLIES WHICH SHOULD BE USED TO MAINTAIN VEHICLE VOLTAGE."

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Transmission and driveline, Axle

Vehicles listed
PORSCHE 9112017

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
122-T8T7L-122017-12-14. Service bulletin. Subject: Bleeder screw for front axle lift system Situation: There is a possibility that the bleeder screw for the front axle lift system was not tightened to the prescribed tightening torque on the affected vehicles. This can impair the function of the lift system. The error message "Error lift system" can then be displayed in the instrument cluster when the lift function is activated.