Service bulletin 057-REV2A
A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.
| Type | Service bulletin |
|---|---|
| NHTSA id | 10072917 |
| Published by NHTSA | 2016-06-22 |
| Manufacturer's number | 057-REV2A |
| Manufacturer's date | 2014-01-01 |
| NHTSA component | ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL |
NHTSA's summary
SUMMARY TO BE PROVIDED ON A FUTURE DATE.
The document
No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.
Components
Electrical system, Instrument cluster
| KIA SORENTO | 2014 |
|---|
Listing a model year does not mean every vehicle of it is concerned: the document says which.
| TSB_SST067_R1 | 2021-12-01. Service bulletin. This bulletin provides information regarding test procedure of the Bearing Clearance Tester (BCT) Special Service Tool (SST). The SST comes pre-calibrated from the supplier however, in some cases, due to variable shop compressor air pressure, the SST may need to be re-calibrated to ensure that the tool provides accurate readings when testing the engine rod bearing wear. The calibration and BCT measuring point maintenance is included in this bulletin. |
|---|---|
| TSB-ELE057R3 | 2017-08-02. Service bulletin. TSB: SERVICE ACTION: BCM UPGRADE - IPM LOGIC IMPROVEMENT (SA163A) - This bulletin provides information related to a software upgrade for the Instrument Panel Module (IPM) of some 2014MY Sorento (XMa) vehicles, produced from January 22, 2013 through November 15, 2013 and equipped with a Power Tail Gate (PTG), which may exhibit an intermittent parasitic draw of up to 400mA. |
| TSB-ELE057R2 | 2017-08-02. Service bulletin. TSB: BCM UPGRADE - IPM LOGIC IMPROVEMENT - This bulletin provides information related to a software upgrade for the Instrument Panel Module (IPM) of some 2014MY Sorento (XMa) vehicles, produced from January 22, 2013 to November 15, 2013, and equipped with a Power Tail Gate (PTG) which may exhibit an intermittent parasitic draw of up to 400mA. To correct this condition, the BCM should be reprogrammed using the GDS download, as described in this bulletin. |