# Service bulletin PIP5170A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10070029
- Published by NHTSA: 2016\-06\-09
- Manufacturer's number: PIP5170A
- Manufacturer's date: 2014\-04\-01
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Transmission and driveline, Automatic transmission

## Vehicles listed

- 2014 CHEVROLET CORVETTE

## Other bulletins for the same vehicles and component

- [17\-NA\-066](/bulletins/10239647.md), 2023-07-25, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
- [16\-NA\-130](/bulletins/10232711.md), 2023-03-08, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY. This service bulletin provides information for after installation of a replacement upper valve body, the transmission may have no Reverse and no 2nd gear.
- [06\-00\-89\-031D](/bulletins/10201098.md), 2021-09-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [990420002L](/bulletins/10200154.md), 2021-08-09, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
- [PI1276C](/bulletins/10190563.md), 2021-04-26, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION:INTERNAL:GEARS. Difficult to Shift into Gear, Intermittent Gear Pop Out and/or Mushy Shifts \(No Grind\) Condition/Concern Some customers may comment that the transmission is difficult to shift into gear, intermittent gear pop out occurs, or that the shifter has a mushiness to the shift and lacks crispness in shifts.
- [06\-00\-89\-031D](/bulletins/10190503.md), 2021-04-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [150089004C](/bulletins/10188403.md), 2021-03-08, Service bulletin: SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:FRONT:SHOCK ABSORBER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
- [060089031F](/bulletins/10184501.md), 2020-12-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
- [1308116001F](/bulletins/10183782.md), 2020-12-07, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
- [PIP5531A](/bulletins/10171259.md), 2020-02-10, Service bulletin: ENGINE; POWER TRAIN:AUTOMATIC TRANSMISSION. This Preliminary Information communication provides information to the technician on the steps need to diagnose and repair vehicles that may have stalling shudder and/or hard shifting into 1st gear or reverse vibration on launch \(with excessive crankshaft end play\). Technician will test to determine if the crank shaft end play is within specification 0.0015?0.0086 inch. If end play is found to be out of specification, remove engine and inspect for possible crankshaft thrust bearing and/or crankshaft for wear. Inspect thrust bearing for wear on one side and crankshaft on that "mating" surface. If the thrust bearing has three vertical channels worn off replace connecting rod bearings, main bearings, thrust bearing and crankshaft. If working on a Corvette the oil tank with lines and oil cooler are both required to be replaced if equipped

JSON: [/v1/bulletins/10070029](/v1/bulletins/10070029)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIP5170A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10070029&vehicle=Service%20bulletin%20PIP5170A)