# Service bulletin 12\-23\-2014

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10068682
- Published by NHTSA: 2016\-06\-02
- Manufacturer's number: 12\-23\-2014
- Manufacturer's date: 2014\-12\-23
- NHTSA component: EXTERIOR LIGHTING:FOG LIGHTS

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Lighting

## Vehicles listed

- 2015 SUBARU IMPREZA

## Recalls for the same vehicles and component

- [2022394](/recalls/tc/2022394.md), 2022-07-21: Lights And Instruments
- [19V149000](/recalls/nhtsa/19V149000.md), 2019-02-28: EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH
- [15V366000](/recalls/nhtsa/15V366000.md), 2015-06-12: FORWARD COLLISION AVOIDANCE: CRASH IMMINENT BRAKING; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH

## Other bulletins for the same vehicles and component

- [07\-59\-07R](/bulletins/11012260.md), 2025-01-03, Service bulletin: EXTERIOR LIGHTING; ELECTRICAL SYSTEM. This bulletin is for information purposes only.The bulletin adresses design changes of the headlamps and rear combination lamps, where moisture and or condensation may develop on the inside of the lamp lenses.
- [064614](/bulletins/10233428.md), 2023-04-03, Service bulletin: SERVICE BRAKES, AIR:ANTILOCK:CONTROL UNIT/MODULE; EXTERIOR LIGHTING. This bulletin provides a revised adjustment procedure to be used when diagnosing Brake Light Switch \(BLS\) \-related DTCs C1531 and/or C0054. If the BLS is out of adjustment, the ABS and/or VDC warning lamp may illuminate.
- [WUE\-90 tool](/bulletins/10163520.md), 2019-08-06, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS; ELECTRICAL SYSTEM; EXTERIOR LIGHTING; EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. SOA has received multiple requests for additional 83399Fj000rt BRAKE LIGHT SWITCH tools and now has sufficient stock to allow retailers to place orders for single tools.
- [WUE\-90](/bulletins/10160512.md), 2019-05-28, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. Subaru of America, Inc. \(Subaru\) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
- [WUE\-90R](/bulletins/10160204.md), 2019-05-20, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS. Subaru of America, Inc. \(Subaru\) is recalling certain Crosstrek, Forester, Impreza, and WRX vehicles to replace the brake lamp switch. A total of 1,303,530 U.S. vehicles will be affected by this recall.
- [07\-128\-18R](/bulletins/10146480.md), 2018-11-05, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS:SWITCH. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted \(or faulty\) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.
- [15\-232\-18](/bulletins/10145079.md), 2018-10-01, Service bulletin: VISIBILITY; EXTERIOR LIGHTING:FOG LIGHTS. This Service Information bulletin announces a change made to the lens portion of the fog light assembly. The new lens has optimized light distribution characteristics while remaining interchangeable with the original type.
- [07\-119\-17R](/bulletins/10131631.md), 2018-04-02, Service bulletin: INTERIOR LIGHTING. This Service Information bulletin announces a production method change to the rear combination lamp assembly. The application procedure of the anti\-fog coating was changed to prevent a customer concern of visible drip marks \(or streaks\) appearing on the inside of the lamp lens.
- [06\-55\-16R](/bulletins/10131628.md), 2018-04-02, Service bulletin: EXTERIOR LIGHTING:BRAKE LIGHTS. EXCLUDES HYBRID MODELS. This bulletin announces a design change to the brake light switch \(BLS\) to reduce the possibility of improper illumination of the ABS and/or VDC warning lamp. In the event a product containing silicone is used to lubricate the BLS or for other purposes in the area around the switch, a non\-conductive coating may develop over time on the internal electrical contacts and affect operation of the switch. On / Off signal output from the BLS is critical for proper operation of various systems on the vehicle. When the switch does not operate properly, warning lamps illuminate and DTCs are stored. A table with BLS\-related DTCs and additional information is provided in the Service Procedure information. A photo of the switch changes is shown below. This bulletin also provides a diagnostic and adjustment procedure to be used when diagnosing brake light switch\-related DTCs.
- [07\-128\-18R](/bulletins/10130270.md), 2018-03-13, Service bulletin: SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES; EXTERIOR LIGHTING:BACK UP LIGHTS. This Service Information bulletin provides a measurement and adjustment procedure for the stop lamp switch. An improperly adjusted \(or faulty\) stop lamp switch can cause any of the DTCs listed above to set and result in the related system?s warning lamp to illuminate.

JSON: [/v1/bulletins/10068682](/v1/bulletins/10068682)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2012-23-2014&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10068682&vehicle=Service%20bulletin%2012-23-2014)