WenmarOpen by Wenmar Pro

Service bulletin 08-016-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10068526
Published by NHTSA2016-06-02
Manufacturer's number08-016-13
Manufacturer's date2013-03-19
NHTSA componentELECTRICAL SYSTEM:SOFTWARE

NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Electrical system, Software

Vehicles listed
CHRYSLER 3002013
CHRYSLER TOWN AND COUNTRY2013
DODGE CHARGER2013

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
18-088-162022-08-15. Service bulletin. Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following DTCs have been set: · **P0335 - Crankshaft Position Sensor Circuit. · P2610 - PCM Internal Engine Off Timer Performance. · P0456 - EVAP System Small Leak (Sales Code ERB).** · U0140 - Lost Communication With Body Control Module - (BCM) (VF, LD, LX vehicles only). · P0606 - Internal Control Processor.
21-012-12 REV. B2022-07-25. Service bulletin. Flash: Transmission Shift Quality Improvements This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software.There may be two software packages to choose from. Both software updates will fix all symptoms/conditions listed. Refer to Service Bulletin 21-008-12 for details about the software choices. Some customers may notice any of the following: Harsh 1-3 upshift while operating in Economy (ECO) mode. Harsh 2-3 upshift while operating in normal mode.For 2012 model year, the harsh 1-3 upshift in Economy Mode and the harsh 2-3 upshift in Normal Mode was corrected in the revised software enhancements that were released in Service Bulletin 21-008-12 dated March 23, 2012. 1-2 upshift clunk following a throttle back out (2012 - 2013 model year only).In addition to correcting the previous Symptom/Conditions, the following enhancements have been made to improve the shift quality of the 62TE transmission: Shift schedule changes for the 1-2, 3-4, 4-5, and 5-6 upshifts and the 6-4P, 6-5, and 5-4 downshifts. Fifth gear torque converter lock-up/unlock improvements.
08-013-13 REV. A2022-07-18. Service bulletin. This bulletin involves reconfiguring the vheicle display the passive entry Enable/Disable feature on the menu screen.
1807415 REV A2022-07-05. Service bulletin. Powertrain Diagnostic And System Enhancements.
08-032-132021-03-15. Service bulletin. Flash: No Audio From The Radio Caused By The Amplifier Not Communicating This bulletin involves re-flashing the Amplifier with updated software. The customer may indicate that there is no audio and/or radio is muted. This condition may be caused by the amplifier not communicating on the bus.Flashing the amplifier will correct this condition.
08-114-15 REV A2019-05-20. Service bulletin. Radio Software Enhancements This bulletin involves updating the radio's software. CAUTION: Confirm the correct radio flash file to the applicable model and family vehicle before flashing. A customer may experience one or more of the following: ? Radio display screen intermittently may go blank. ? Radio display screen may lock up. ? Back up display may not turn off. ? Loss of radio memory for skipped channels or incorrectly displaying skipped channels in the menu list. ? Charging schedule showing in the setting menu (FF BEV only). ? Korean language was not supported (APAC - Korea only). Enhancement: ? Removing the charging schedule from showing in the setting menu (FF BEV only). ? Adding Korean language support (APAC - Korea only).
18-086-15 REV A2019-05-20. Service bulletin. Flash: Powertrain System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Code (DTCs) in the PCM: ? U0140 - Lost Communication With Body Control Module (BCM) (VF, LD, LX Vehicles only). ? P0606 - Internal Control Processor.
18-089-152019-05-20. Service bulletin. Flash: Diagnostic And System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more one of the following Diagnostic Trouble Codes (DTCs) set in the Powertrain Control Module (PCM): ? U0140 - Lost Communication With Body Control Module. ? P0456 - Evap System Small Leak.
18-086-152019-05-20. Service bulletin. Flash: Powertrain System Improvements/Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination or a less than desired powertrain response when operating their vehicles in high ambient temperatures. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Code (DTCs) in the PCM: ? U0140 - Lost Communication With Body Control Module (BCM) (LD, LX Vehicles only). ? P0606 - Internal Control Processor. The following powertrain system improvements/enhancements are included in this software release: ? Corrected a generic scan tool display issue regarding Mode 6 data accuracy.
08-010-152018-11-19. Service bulletin. Flash: DTC B1A8A-00 - No Start Condition With a Low Battery This bulletin involves reprogramming the Radio Frequency Hub (RF-HUB) with new software. A small number of customers may report no start condition with the Vehicle Security Light flashing and the DTC B1A8A-00 ? MULTI-MODULE VIN HANDSHAKE FAILURE ? active.