# Service bulletin 2036191/1

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10066375
- Published by NHTSA: 2016\-05\-23
- Manufacturer's number: 2036191/1
- Manufacturer's date: 2014\-01\-13
- NHTSA component: BACK OVER PREVENTION: CAMERA SYSTEM

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Driver assistance, Backup camera

## Vehicles listed

- 2013 to 2014 AUDI A6
- 2013 to 2014 AUDI A7
- 2013 to 2014 AUDI A8
- 2013 to 2014 AUDI Q7

## Other bulletins for the same vehicles and component

- [4313172033666](/bulletins/10250679.md), 2024-02-26, Service bulletin: AIR BAGS; ELECTRONIC STABILITY CONTROL:AUTOMATIC \(ASC\); SUSPENSION; BACK OVER PREVENTION; LANE DEPARTURE. Vehicle lowers itself, air suspension warning light on, level sensor error \(PR\-2MB or 1BK\)
- [145220381192](/bulletins/10216654.md), 2022-08-01, Service bulletin: BACK OVER PREVENTION. The message ?Oil minimum warning, add one quart of oil? appears in the instrument cluster, but the oil level is above the minimum level \(when measured with special tool T40178\). ? There are no DTCs related to oil level stored in the ECM memory. The oil level sensor is defective.
- [144920284402](/bulletins/10216651.md), 2022-08-01, Service bulletin: BACK OVER PREVENTION:DISPLAY FUNCTION. The customer complains of one or more of the following issues: ? When the vehicle is completely refueled, the vehicle range \(?distance to empty?\) that is displayed is different than the vehicle range that was displayed the last time the vehicle was completely refueled. ? The displayed vehicle range drops inconsistently. ? After the vehicle is refueled, the displayed vehicle range does not change for a long period of time. ? When the vehicle is driven on hilly roads for a long period of time, the displayed vehicle range suddenly changes by a significant amount. ? There are no DTCs related to fuel senders stored in the instrument cluster control module, J285 \(address word 17\). This condition does not involve or affect the accuracy of the fuel level indicator, but only the estimated distance to empty display on the on\-board computer.
- [134420354631](/bulletins/10216646.md), 2022-08-01, Service bulletin: EQUIPMENT; BACK OVER PREVENTION. In order to provide effective lubrication and cooling of internal engine components, all internal combustion engines consume a certain amount of engine oil. Oil consumption varies from engine to engine, and may change significantly over the life of the engine. Typically, engines with specified break\-in periods consume more oil during the break\-in period, and the oil consumption will stabilize after the break\-in period. Refer to the Owner?s Manual for specific break\-in procedures. Under normal conditions, the rate of oil consumption depends on the quality and viscosity of the oil, the RPM at which the engine is operated, and the ambient temperature and road conditions. Additional factors include the amount of oil dilution from water condensation or fuel residue and the oxidation level of the oil. Utilizing the advanced sensor technology integrated in models equipped with the 3.0 TFSI engine, it is possible to measure oil consumption electronically via a Guided Function test plan.
- [149320338072](/bulletins/10216630.md), 2022-08-01, Service bulletin: BACK OVER PREVENTION:SOFTWARE. Software improvement with more robust onboard diagnostics.
- [147720305809](/bulletins/10216614.md), 2022-08-01, Service bulletin: BACK OVER PREVENTION:SOFTWARE. The remote key being used is transmitting incomplete immobilizer information to the vehicle, resulting in the condition. Improved software for the comfort system central control module, J393 \(address word 46\) in production. Service software update will follow at a later date \(to be determined\).
- [9113162035912 1](/bulletins/10204505.md), 2021-12-13, Service bulletin: ELECTRICAL SYSTEM; BACK OVER PREVENTION. The coding of the camera control module is not completed correctly.
- [A9119922041430\_6](/bulletins/10165560.md), 2019-10-07, Service bulletin: BACK OVER PREVENTION; BACK OVER PREVENTION: SENSING SYSTEM: CAMERA. This technical service bulletin provides instructions for replacing the rear camera wiring harness.
- [A911870 2041430\_](/bulletins/10133306.md), 2018-04-16, Service bulletin: BACK OVER PREVENTION. This technical service bulletin provides instructions for replacing the rear camera wiring harness.
- [A871885 2044717\_](/bulletins/10133305.md), 2018-04-16, Service bulletin: EQUIPMENT:APPLIANCE:AIR CONDITIONER; BACK OVER PREVENTION. This bulletin provides instructions on correcting a high\-pitched buzzing noise in the cabin when the fan speed is no higher than 2.

JSON: [/v1/bulletins/10066375](/v1/bulletins/10066375)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%202036191%2F1&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10066375&vehicle=Service%20bulletin%202036191%2F1)