# Service bulletin PIP5142

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10063022
- Published by NHTSA: 2016\-04\-26
- Manufacturer's number: PIP5142
- Manufacturer's date: 2013\-09\-01
- NHTSA component: POWER TRAIN:AXLE ASSEMBLY

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Transmission and driveline, Axle

## Vehicles listed

- 2014 CHEVROLET CORVETTE

## Other bulletins for the same vehicles and component

- [PIP5168F](/bulletins/10129067.md), 2018-02-21, Service bulletin: POWER TRAIN:AXLE ASSEMBLY:AXLE SHAFT; BACK OVER PREVENTION; FUEL SYSTEM, GASOLINE. This Preliminary Information communication provides information to the technician on the steps to diagnose and repair vehicles that may have a no crank concern. Technician will need to check the valve train for movement when the engine is cranked. If the valve train is not moving while the crankshaft is moving the front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the valve train is rotating during inspection, disconnect the Camshaft Position sensor and check if the engine will start. If the engine starts front cover will need to be removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly. If the engine does not start with the Camshaft Position sensor disconnected the follow published \“Engine Cranks But Does Not Run\” diagnosis in Service Information. Also perform an Engine Compression Test and Cylinder Leakage Test in Service Information documents all results. If the Service Information procedures above isolate an engine mechanical concern then removed to inspect for a sheared cam sprocket locator pin. If the cam sprocket locator pin has sheared, replace the engine assembly.
- [06\-00\-89\-026L](/bulletins/10113502.md), 2017-08-15, Service bulletin: SERVICE BRAKES; EQUIPMENT:ELECTRICAL; ENGINE AND ENGINE COOLING:EXHAUST SYSTEM; EQUIPMENT:APPLIANCE:AIR CONDITIONER; POWER TRAIN:AXLE ASSEMBLY; EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM. This warranty administration bulletin provide policy information on a revised customer concern not duplicated/verified labor operation numbers and how to submit CCND.
- [PIP5142A](/bulletins/10070018.md), 2016-06-09, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
- [14\-04\-20\-001](/bulletins/10066078.md), 2016-05-19, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
- [14\-04\-20\-001](/bulletins/10066077.md), 2016-05-19, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. SUMMARY TO BE PROVIDED ON A FUTURE DATE.
- [PIP\-5142\-A](/bulletins/10055424.md), 2014-05-20, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. GM: THE REAR AXLE RESTRICTION HAS ENDED. FOLLOW DIAGNOSTIC OR REPAIR PROCESS THOROUGHLY AND COMPLETE EACH STEP. \*JS
- [PI\-1135](/bulletins/10054489.md), 2014-01-29, Service bulletin: POWER TRAIN:AXLE ASSEMBLY. GM:SOME VEHICLES MAY DISPLAY A SERVICE REAR AXLE MESSAGE. DTC C0407 MAY BE SET BECAUSE THE CONNECTOR ON THE PUMP MOTOR IS NOT SEATED PROPERLY. \*JS

JSON: [/v1/bulletins/10063022](/v1/bulletins/10063022)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20PIP5142&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10063022&vehicle=Service%20bulletin%20PIP5142)