# Service bulletin 07\-001\-13

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10061879
- Published by NHTSA: 2016\-04\-12
- Manufacturer's number: 07\-001\-13
- Manufacturer's date: 2013\-07\-30
- NHTSA component: ENGINE AND ENGINE COOLING

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Engine

## Vehicles listed

- 2012 DODGE RAM 1500
- 2012 DODGE RAM 2500
- 2012 DODGE RAM 3500
- 2013 RAM 1500
- 2013 RAM 2500
- 2013 RAM 3500

## Recalls for the same vehicles and component

- [2017441](/recalls/tc/2017441.md), 2017-09-13: Engine
- [17V562000](/recalls/nhtsa/17V562000.md), 2017-09-12: ENGINE AND ENGINE COOLING:ENGINE:DIESEL
- [14V635000](/recalls/nhtsa/14V635000.md), 2014-10-08: ENGINE AND ENGINE COOLING:ENGINE:DIESEL; FUEL SYSTEM, DIESEL
- [13V177000](/recalls/nhtsa/13V177000.md), 2013-05-07: ENGINE AND ENGINE COOLING
- [2013104](/recalls/tc/2013104.md), 2013-04-05: Engine
- [13V122000](/recalls/nhtsa/13V122000.md), 2013-04-03: ENGINE AND ENGINE COOLING

## Other bulletins for the same vehicles and component

- [112906](/bulletins/11034373.md), 2026-07-02, Service bulletin: ENGINE. BEARING \- CRANKSHAFT THRUST and KIT
- [112906](/bulletins/11034337.md), 2026-07-02, Service bulletin: ENGINE. BEARING \- CRANKSHAFT THRUST and KIT
- [S2505000001](/bulletins/11014973.md), 2025-03-05, Service bulletin: ENGINE. CEL \(Check Engine Lamp\) C006A\-49 Multi\-Axis Acceleration Sensor Internal Electronic Failure And C10CC\-00 ESC Sensors.
- [67A Rev 4 Combo](/bulletins/11002737.md), 2024-07-02, Service bulletin: ENGINE. Emission Recall 67A D Truck Engine Calibration
- [67A Rev 3 Combo](/bulletins/11002526.md), 2024-06-28, Service bulletin: ENGINE. EMISSION RECALL 67A D Truck Engine Calibration
- [S1625000004 REV.A](/bulletins/11001020.md), 2024-06-05, Service bulletin: ENGINE; UNKNOWN OR OTHER. On Board Diagnosis \(OBD\) Monitor Readiness Information
- [Reference67A](/bulletins/10251812.md), 2024-03-18, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL. Emission Recall 67A D Truck Engine Calibration
- [0902323](/bulletins/10248951.md), 2024-01-16, Service bulletin: ENGINE AND ENGINE COOLING. Throttle Blade Icing Service Fix Customers may experience a Malfunction Indicator Lamp \(MIL\) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes \(DTCs\) have been set: ? P2072 \- Electronic Throttle Control System \- Ice Blockage. ? P2110 \- Electronic Throttle Control \- Forced Limited RPM. ? P2118 \- Electronic Throttle Control Motor Current Performance \- Bank 1. The customer may also comment on the following: ? The vehicle may not start \(below freezing conditions \- typically \-7 °C \(\-20 °F\)\) This bulletin involves removing the PCV valve and hose to dry out, drying out the throttle body and installing an updated make\-up air hose, air cleaner lid and changing the oil.
- [Reference67A](/bulletins/10248914.md), 2024-01-16, Service bulletin: ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL; ENGINE AND ENGINE COOLING. Emission Recall 67A \- D Truck Engine Calibration
- [9003357A](/bulletins/10247906.md), 2024-01-02, Service bulletin: ENGINE AND ENGINE COOLING. ADAPTER, Engine Oil Filter \(Pentastar V6\) For all 2014MY replace the Oil Filter Adapter \(OFA\). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1\) Remove OFA 2\) Replace only the oil inlet O\-ring and gaskets \(seals kit in SOL above\). 3\) Re\-install the OFA. For 2023MY and beyond use black O\-ring. For 2022MY and prior use red O\-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.

JSON: [/v1/bulletins/10061879](/v1/bulletins/10061879)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%2007-001-13&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10061879&vehicle=Service%20bulletin%2007-001-13)