# Service bulletin SB\-0000186348\-A

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

- Type: Service bulletin
- NHTSA id: 10061090
- Published by NHTSA: 2016\-03\-31
- Manufacturer's number: SB\-0000186348\-A
- Manufacturer's date: 2014\-03\-04
- NHTSA component: POWER TRAIN:AUTOMATIC TRANSMISSION

## NHTSA's summary

SUMMARY TO BE PROVIDED ON A FUTURE DATE.

## The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

## Components

Transmission and driveline, Automatic transmission

## Vehicles listed

- 2012 CHEVROLET SILVERADO 3500
- 2012 GMC SIERRA 3500

## Other bulletins for the same vehicles and component

- [17\-NA\-066](/bulletins/10239647.md), 2023-07-25, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN. This service bulletin provides information for automatic transmission Oil Cooler Flush and flow test.
- [16\-NA\-130](/bulletins/10232711.md), 2023-03-08, Service bulletin: POWER TRAIN; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY. This service bulletin provides information for after installation of a replacement upper valve body, the transmission may have no Reverse and no 2nd gear.
- [06\-00\-89\-031D](/bulletins/10201098.md), 2021-09-07, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; POWER TRAIN; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [990420002L](/bulletins/10200154.md), 2021-08-09, Service bulletin: POWER TRAIN:MANUAL TRANSMISSION; POWER TRAIN:AUTOMATIC TRANSMISSION; EQUIPMENT. This service bulletin provides information on Driveline Clunk Noise and what is acceptable and what is considered normal operation.
- [06\-00\-89\-031D](/bulletins/10190503.md), 2021-04-20, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification
- [150089004C](/bulletins/10188403.md), 2021-03-08, Service bulletin: SUSPENSION:FRONT:MACPHERSON STRUT; SUSPENSION:FRONT:SHOCK ABSORBER; POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT. This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage.
- [060089031F](/bulletins/10184501.md), 2020-12-21, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION; ENGINE. This service bulletin provides information on OEM and Remanufactured Engine and Automatic Transmission/Transaxle Identification.
- [1308116001F](/bulletins/10183782.md), 2020-12-07, Service bulletin: EQUIPMENT; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION. The intent of this technical bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them.
- [PIT5206G](/bulletins/10178323.md), 2020-08-10, Service bulletin: EQUIPMENT ADAPTIVE/MOBILITY; ELECTRICAL SYSTEM; POWER TRAIN:AUTOMATIC TRANSMISSION; SERVICE BRAKES; EQUIPMENT. This Preliminary Information communication provides information to the technician with the steps on diagnosing and repairing vehicles that may have unwanted grade braking, reduced engine power with no Driver Information Center messages ? Brake Pedal Override Feature ?, transmission busy or frequent shifting up or down, and Diagnostic Trouble Codes P057B, P057C, and/or P057D may or may not be set. Technician will use this preliminary information to find the brake pedal position data parameters in the scan tool, and also to provide some additional diagnostic help. These issues may be caused by an incorrect brake pedal position sensor input to the engine control module. Technician will verify with the scan tool if the engine control module has the correct parameters for the brake pedal position sensor. If an engine control module brake pedal position sensor relearn is performed, the truck may be temporarily repaired until the intermittent wiring issue between the engine control module and brake pedal position sensor occurs again. On 2014 and newer trucks inspect and repair any damage to X115 and X119. On the 2014 and previous trucks inspect and repair any damage to X205.
- [080730026F](/bulletins/10165123.md), 2019-09-23, Service bulletin: POWER TRAIN:AUTOMATIC TRANSMISSION. This informational bulletin provides information on Some vehicles may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto\-start feature, if equipped.

JSON: [/v1/bulletins/10061090](/v1/bulletins/10061090)

[Report an error on this page](https://github.com/wenmar-pro/wenmar-open/issues/new?template=data_correction.yml&title=Data%20correction%3A%20Service%20bulletin%20SB-0000186348-A&page=https%3A%2F%2Fopen.wenmarpro.com%2Fbulletins%2F10061090&vehicle=Service%20bulletin%20SB-0000186348-A)