WenmarOpen by Wenmar Pro

Service bulletin SBU-15008

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10059104
Published by NHTSA2016-02-04
Manufacturer's numberSBU-15008
Manufacturer's date2015-03-01
NHTSA componentPOWER TRAIN:TRANSFER CASE (4-WHEEL DRIVE)

NHTSA's summary

GMC/CHEVROLET: INFORMATION ON SERVICE PROCEDURE REGARDING TRANSFER CASE ADAPTER HOUSING AND INSTALLING TWO MISSING ADAPTER LOWER TRANSFER CASE BOLTS, WHICH CAN INCREASE VIBRATION AT SPEEDS ABOVE 80 MPH (128 KM/H). MODEL 2015 CANYON, COLORADO 4WD. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Transmission and driveline, Transfer case

Vehicles listed
CHEVROLET COLORADO2015
GMC CANYON2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
19NA1362021-02-01. Service bulletin. This service bulletin provides a diagnostic procedure to aid in correcting a customer concern of a Howling, Whining/Whirring Noise, Shudder/Vibration and/or Grinding Noise While in 4HI, 4HI Auto and/or During Parking Lot Maneuvers in Auto Mode.
PIE05252019-07-29. Service bulletin. This engineering informational bulletin is requesting information on the 4WD will not engage when requested.
PIP3366C2018-08-20. Service bulletin. This Preliminary information communicates to the dealer technician thatLight Duty Trucks equipped with automatic transmissions and 4 wheel drive may exhibit a condition of grinding/ratcheting type noise when shifting the automatic transmission into park while the transfer case is in 4 wheel drive low (4LO) range. Dealers technician's are advised this condition should be deemed a normal characteristic of 4WD low operation.
PIP5250C2018-06-04. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message on the Driver Information Center when operated below 10 degrees Fahrenheit (-12 Celsius). Technician may find C0398 or C0326 stored in the Transfer Case Control Module. For vehicles with Regular Production Option Code NQH and NQ6 and only setting Diagnostic Trouble Codes C0398 or C0398 and C0326 the replacement of the actuator motor will correct the concern. Dealer will need to contact General Motors Product Quality Center for further assistance.
060089026N2018-06-04. Service bulletin. This warranty bulletin provides labor operation numbers for customer concerns that cant be duplicated.
PIP5256B2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have a Service 4WD message displayed in the Instrument Panel Cluster. Technician may find diagnostic trouble code B2725 or B0770 in the Transfer Case Control Module. Technician will need to replace the Transfer Case Select switch with the correct switch.
PIP5217A2017-08-15. Service bulletin. This Preliminary Information communication provides information to the technician about vehicles that may have a service 4 wheel drive message and the transfer case is stuck in neutral. Technician may find Diagnostic Trouble Code C0398 set in the Transfer Case Control Module. Technician should verify if the vehicle was dinghy towed the vehicle using the owner's manual procedure. If the vehicle has a C0398 after this type of procedure clear the Diagnostic Trouble Code and return the vehicle to the customer with a copy of this Preliminary Information. An owner's manual supplement will be sent to owner's with more information on dinghy towing the vehicle. If the vehicle stays in neutral after towing, with the ignition in the RUN position and engine not running cycle fuse TREC under the hood then continue to use the "Shifting out of neutral" in the owner's manual.