WenmarOpen by Wenmar Pro

Service bulletin SB-21-032-15REVA

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
TypeService bulletin
NHTSA id10058583
Published by NHTSA2015-10-15
Manufacturer's numberSB-21-032-15REVA
Manufacturer's date2015-07-15
NHTSA componentPOWER TRAIN:AUTOMATIC TRANSMISSION

NHTSA's summary

JEEP: LATEST SOFTWARE IS AVAILABLE TO BE REPROGRAMMED FOR TRANSMISSION CONTROL MODULE (TCM) DUE TO MALFUNCTION INDICATOR LAMP (MIL) BEING ON AND HAVING A HARSH SHIFTING OR TO UNABLE ENGAGED GEARS OF TRANSMISSION. MODEL 2015 RENEGADE. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Transmission and driveline, Automatic transmission

Vehicles listed
JEEP RENEGADE2015

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Recalls for the same vehicles and component
16V5290002016-07-12. POWER TRAIN:AUTOMATIC TRANSMISSION

A recall listed here may apply to some of the same vehicles. Only the manufacturer can say whether it applies to one vehicle.

Other bulletins for the same vehicles and component
S23250000072024-01-08. Service bulletin. MIL/check engine lamp comes on after performing U90 recall PCM software update.
S23250000072023-10-30. Service bulletin. MIL/check engine lamp comes on after performing U90 recall PCM software update.
18042212022-10-17. Service bulletin. Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1D7F-00 - ETC Self-Learning Failure. P1523-00 - VVA Low Oil Pressure. P1524-00 - Oil Pressure Out Of Range - Camshaft Advance/Retard Disabled. P0141 - O2 Sensor 1/2 Heater Performance. Some customers may experience one or more of the following conditions: After a short trip and shutting the engine off for 5-10 minutes, vehicle exhibits a long crank/start condition(2016 BU EMEA only). Cruise control will not set at 32 kph (20 mph). Engine cranking times out after five seconds. Cruise control will not engage at highway speeds and when in 6th gear. A ticking noise coming from the top of the engine area. The ticking noise is heard particularly at idle (EMEA and APAC only). The following enhancements are also included: Improved purge sensor performance. Updated fuel strategy to inhibit spark plug fouling.
21040152022-09-26. Service bulletin. Tranmission shift Drivability enhancements.
21-054-152022-07-25. Service bulletin. Flash: Vehicle Will Not Shift Out Of Park This bulletin involves reprogramming the Electronic Shift Module (ESM) with the latest available software. Some Customers may experience a condition where the vehicle will not shift out of park while the engine running at idle and brake pedal applied. Cycling the ignition key off and restarting the engine will allow shift. Technicians may find DTC P0606-00 Control Module Processor. Flashing the ESM with the latest software will correct this concern.
18-063-16REV2021-05-24. Service bulletin. Powertrain diagnostic and system improvements.
21-040-152021-05-03. Service bulletin. Tranmission shift Drivability enhancements.
18-030-202020-04-27. Service bulletin. Flash: Powertrain Diagnostic and System Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software.
21-025-192019-07-15. Service bulletin. Nine-Speed Automatic Transmission (X80 Warranty Extension) This bulletin involves extending the warranty on the nine-speed automatic transmissions.
5ZM61LXHA2019-05-20. Service bulletin. Part Description: Shifter - Automatic Transmission Issue Description: Before this part is replaced for any issue please call John Tache on cell (248) 841- 6711. If you do not receive a return call within 15 minutes, proceed with the repair. Please be sure to accurately record any DTCs identified with the scan tool and document them on the repair order