Service bulletin SIB-65-07-15

A bulletin is a manufacturer's communication to its dealers, as NHTSA indexes it. The summary is NHTSA's. The document is the manufacturer's: read it at NHTSA. A bulletin is not a recall, and listing a model year does not mean every vehicle of it is concerned.

The communication, as NHTSA indexes it (as of 2026-10-19)
Type	Service bulletin
NHTSA id	10058472
Published by NHTSA	2015-09-25
Manufacturer's number	SIB-65-07-15
Manufacturer's date	2015-04-01
NHTSA component	AIR BAGS

NHTSA's summary

BMW: ON THE INSTRUMENT CLUSTER IS DISPLAYED AIRBAG WARNING LIGHT IS ON OR CHECK CONTROL MESSAGE (CCM) RESTRAINT SYSTEM FAULTY DISPLAYED, ON SOME VEHICLES DUE TO HIGH RESISTANCE CAUSED BY SPORADICALLY POOR CONNECTION IN AIR BAG IGNITION CIRCUIT. MODEL I01 (I3REX), I12 (I8). NO YEARS LISTED. *PE

The document

No address for NHTSA's copy can be built for this communication. Ask the dealer for it by the manufacturer's number.

Components

Air bags

Vehicles listed
BMW I8	2014

Listing a model year does not mean every vehicle of it is concerned: the document says which.

Other bulletins for the same vehicles and component
B513016	2020-04-20. Service bulletin. TAILGATE UNINTENTIONALLY OPENS: This Service Information Bulletin (Revision 4) replaces SI B51 30 16 dated March 2018. Trunk/tailgate may open when vehicle is locked Trunk/tailgate may open while the vehicle is in motion usually after stopping such as a traffic light etc. Vehicle key trunk/tailgate button may be accidentally pressed thus opening the tailgate.
B651218	2019-02-25. Service bulletin. AIRBAG INDICATOR LIGHT REMAINS ON AFTER SEAT OCCUPANCY MAT REPLACEMENT. The airbag indicator light illuminates after replacing the CIS (Capacitive Interior Sensing) mat.
BMWFEB1516	2018-12-10. Service bulletin. "Delivery Stop: I12 (i8) Passenger-Side Front Air Bag Message Recipients: General Managers, Sales Managers, Service and Parts Managers, Service Managers, Shop Foremen, Service Technicians Message Text: BMW AG has issued a Delivery Stop for I12 (i8) with a potential of the front passenger-side air bag not installed properly. At this time, a repair solution is being developed. You will be update when information becomes available. There are a total of three (3) vehicles affected. The vehicles in center inventory will be stopped today under ""vehicle comments"" in the key reader with the message: ""A Delivery Stop has been issued for this vehicle. Dealers must ensure that all Campaigns are completed before retail delivery to the customer. Situation - Passenger-Side Air Bag. Please be reminded that it is a violation of Federal law for you to sell, lease or deliver any vehicle covered by this notification until the delivery stop repair has been performed. This means that centers may not legally deliver new motor vehicles to a consumer until it is fixed or use/sell replacement equipment/parts subject to a delivery stop. Note also that substantial civil penalties apply to violations of this law. Also, you should not sell, lease or deliver any Certified Pre-Owned or used vehicles subject to a delivery stop until the repair is completed."
B650715	2018-12-10. Service bulletin. "This Service Information bulletin supersedes SI B65 07 15 dated January 2016. SUBJECT Airbag Warning Light ON: Fault 930BE8, High-voltage System Shutdown. The airbag warning light in the instrument cluster is on, or the check control message (CCM) ""Restraint system faulty"" is displayed. The advance crash safety module (ACSM4I) has fault code 930BE8 ""High-voltage system switchoff Range extender Electrical Machine Electronics (REME)/battery management electronics: Resistance too high"" stored. A sporadically poor connection causes high resistance in the airbag ignition circuit."
B650715	2018-12-10. Service bulletin. "This Service Information bulletin supersedes SI B65 07 15 dated April 2015. designates changes to this revision SUBJECT Airbag Warning Light ON: Fault 930BE8, High-voltage System Shutdown . The airbag warning light in the instrument cluster is on, or the check control message (CCM) ""Restraint system faulty"" is displayed. The advance crash safety module (ACSM4I) has fault code 930BE8 ""High-voltage system switchoff Range extender Electrical Machine Electronics (REME)/battery management electronics: Resistance too high"" stored. A sporadically poor connection causes high resistance in the airbag ignition circuit."
B611517	2018-11-05. Service bulletin. SERVICE ACTION: PROGRAMMING CONTROL MODULES FOR OBD COMPLIANCE. Communication between the HV Battery Control Module (SME) and the HV Electrical Machine Electronics (EME) may be disrupted. The Check Engine Light may not be illuminated when the ODB related fault is stored in the SME module. SME diagnostic software error.